PRS: Entry certification

Correct as at 20th January 2018. It may be superseded at any time.

 

Introduction


Objectives of vehicle certification

Vehicle certification is about ensuring that vehicles used on New Zealand’s roads meet the roadworthiness requirements defined in New Zealand law – when they enter the fleet and throughout their on-road lives.

Objectives of the Performance Review System (PRS)

The NZ Transport Agency’s goal is to improve transport for all New Zealanders by improving the integration, safety, responsiveness and sustainability of the transport system. To do this, everyone involved in vehicle certification must apply the requirements set out in law accurately and consistently. For certifiers, this means following the requirements specified in their Vehicle inspection requirements manual (VIRM) and other required documentation.

The PRS is a tool used by the Transport Agency for all certifiers and is intended to:

  • focus on issues important to road safety
  • be open and transparent in reviewing the performance of certifiers
  • provide a level playing field, as it applies equally to all certifiers
  • be easy to understand and use
  • allow certifiers to measure their own performance in exactly the same way as the Transport Agency reviewer during a review
  • allow and encourage certifiers to identify problems and opportunities to improve so they can take early action on their own initiative
  • identify certifiers who perform well so they can be given incentives to maintain their performance and look for ways of continuously improving it
  • identify certifiers who perform poorly so they can be encouraged through more frequent reviews to improve their performance.

How the PRS works

The PRS clearly sets out:
  • what is expected of certifiers
  • the way the Transport Agency will assess certifiers’ performance against these expectations
  • a scoring system that enables certifiers’ performance to be measured.
The PRS is made up of two main parts:

1. General part

This identifies five general categories that are important for all types of certification work.

2. Technical part

The Technical part differs for each type of certification work. For example, for WoF and CoF certification, the categories of the Technical part follow the items set out in the Vehicle inspection requirements manual: In-service certification.

The General part measures how well certifiers perform in complying with all legal requirements (including Transport Agency requirements) relating to vehicle certification. It does this by measuring performance in five categories:

1. Technical performance

Do certifiers identify vehicles and components correctly, make correct technical decisions and certify those vehicles and components correctly? Are they competent in all technical aspects of their certification work?

2. Administrative performance

Are certifiers competent in all administrative aspects of their certification work, including the proper use of documents and correct entry of information?

3. Resources

Do certifiers have the right resources for their certification work, eg the right facilities and equipment?

4. Management

Do certifiers properly manage the parts of their operations that support their certification work, eg do they make sure their equipment is properly maintained?

5. Performance improvement

Do certifiers actively identify problems and opportunities to improve and take advantage of them? Do they regularly review their own performance? Are they open to complaints?

Each category is made up of a number of elements that are relevant to the category. For example, the resources category is made up of the following elements:

  • facilities
  • technical equipment
  • administration equipment
  • technical information
  • controlled certification documents
  • certification staff.

In this manual each category has a scoring page associated with it which provides performance descriptions and corresponding scores for each element. Scores range from 0 to 3 and are allocated by matching a certifier’s performance to the corresponding descriptions set out in the scoring pages.

The Technical part also has scoring pages. The scores from these feed into the General part to produce a total score.

5

Figure 1-1-1. Sample scoring page (detail)

How the parts of the PRS fit together

How Transport Agency reviewers will use the PRS

During performance reviews, our reviewers will observe you at work. Reviewers will compare your performance with the descriptions on the PRS scoring sheets, and will score you accordingly. These scores will be combined into an overall PRS score.

We will tell you the result for each area reviewed, and you will be able to use your PRS manual to see how the score was calculated.

There are no hidden measurement or scoring systems. Reviewers are encouraged to help you understand how the system works and how it can be used to help continuous improvement. Success for the Transport Agency will be measured in higher performance scores – not in greater numbers of faults detected.

Use the PRS to improve your performance

We encourage certifiers to use the PRS regularly to review their own performance, and to identify problems and opportunities to improve. This section is called Measuring your performance, and the scoring guidelines section explains how this is done.

Benefits of good performance

The Transport Agency will reward good performance scores by reducing the frequency of planned review visits. This will save you money by reducing the cost of planned review fees. It will also reduce the disruption to your business caused by reviews.

Penalties for poor performance

Poor performance scores will reduce the Transport Agency’s confidence in you as a certifier. Such scores will mean more planned review visits so that your performance can be more closely monitored (see PRS Scores and actions table in the Measuring your performance section). Poor performance scores will increase the cost to you in planned review fees and the disruption to your business caused by reviews. We hope this will encourage you to use the results of the PRS to improve your performance.

Enforcement action

The PRS is a powerful tool to enable the Transport Agency to identify persistently poor performers. We are confident that most certifiers will respond positively to the PRS approach and use it to help improve their performance. When certifiers fail to respond positively and continue to perform poorly, this will be identified by PRS reviews. In these cases, the Transport Agency will focus its enforcement and investigation resources on obtaining evidence of poor performance.

The final sanction

Clear evidence of persistently unacceptable performance will lead to disciplinary action. If certifiers fail to respond to warnings and suspension action, evidence gained during reviews will be used to support the case for withdrawal of their authorisation.

Road safety and the maintenance of a fair vehicle certification system demand firm and decisive action by the Transport Agency. When certifiers fail to carry out their responsibilities the Transport Agency will act to remove their authorisation. This will be done in a fair and reasonable manner and decisions will be open to appeal.

Working together in partnership

The Transport Agency’s aim is to work together with certifiers openly and transparently to achieve our joint goals of high standards of certification, leading to an improvement in road safety.

Definitions and abbreviations

Adjusted score

Means the total score that has been adjusted to take into account element scores of 1+ or less, ie where there is poor performance in some areas.

Category

These are the different areas that make up inspection and certification work. There are five categories which are weighted depending on their importance: Technical performance, Administrative performance, Resources, Management and Performance improvement. The five categories make up the General part of the PRS from which a score is derived.

Certifier

Means a vehicle inspector and/or inspecting organisation, depending on the context, and includes a specialist certifier.

Computer system

Means the system where the certifier enters certification .

Controlled document

Means a document you must use and complete as part of your inspection and certification work, such as WoF labels, checksheets, certification plates or certificates.

Description

Means the performance description for each element score against which the certifier’s performance is assessed. There are four descriptions for each element, one each for the scores 0, 1, 2 and 3.

Element

Means a detailed area relating to inspection and certification work, and related elements are grouped together to make up a category.

Element score

Means the score that is assigned to an element.

External document

Means any document supplied by outside parties (eg from vehicle owner or manufacturer) that you rely on in your inspection and certification work, such as exemption notices.

General part

Means the main part of the PRS which consists of the five categories and from which the total score is calculated.

Inspection and certification document

Means a document you use as part of your certification work, such as a checksheet or certification label. It includes controlled, uncontrolled and external documents.

Mystery shopper exercise

Means the Transport Agency arranging for a vehicle with known faults to be presented for inspection to check that the certifier carries out the inspection correctly. The certifier does not know that the vehicle is part of a mystery shopper exercise. This give the Transport Agency information about how inspections are carried out between scheduled reviews.

PRS

Means the Performance Review System.

Random re-inspection

Means a reviewer visiting unannounced between reviews and re-inspecting a vehicle that the certifier has just certified. This gives the Transport Agency information about how the certifier is performing between reviews.

Requirements

Means Transport Agency requirements which are contained in the PRS manual, your VIRM, your agreement/contract with Transport Agency and other information issued by Transport Agency.

Review

Means an assessment of your performance as a certifier, and is usually scheduled in advance depending on the score you achieved at the previous review. Reviews are carried out by Transport Agency reviewers.

Score

This is the result of your review and gives an indication of how well you performed. The higher the score, the better your performance as a certifier.

Self-assessment

Means you assess your own performance using the same criteria as the Transport Agency reviewer does when he carries out a review. The PRS requires you to carry out regular self-assessments.

Technical part

Means the part of the PRS that relates directly to the technical aspects of the inspection and certification work, ie technical decisions, technical competence and inspection equipment. The Technical part scores are transferred to the General part before the total score is calculated.

Total score

This is the score that is calculated when all the element scores have been assigned and the category scores have been weighted, but before it has been adjusted for areas of poor performance.

Transport Agency

Means the NZ Transport Agency.

Uncontrolled document

Any document you develop yourself as part of your inspection and certification work, such as design calculations or technical drawings.

VIRM

Means the Vehicle inspection requirements manual. There are different VIRMs, depending on the type of certification work, and each one has a corresponding PRS manual.

Weighted category score

Means a category score that has been weighted to reflect its importance in the overall inspection and certification work relative to the other categories.

General part

 

1 Technical performance

Requirements

  What the NZTA expects of you How the NZTA will assess your performance
1.1
Correct certification outcomes

You and your staff:

  • consistently identify vehicles (including vehicle classes) and components correctly
  • consistently certify vehicles and components only if they comply with all Transport Agency requirements
  • consistently certify vehicles or components that do not comply with all VIRM requirements
  • do not deny certification of vehicles or components if they comply with all Transport Agency requirements.

The Transport Agency will:

  • observe you and your staff at work
  • inspect inspection and certification documents
  • inspect information on the NZTA computer system.

The Transport Agency may:

  • inspect vehicles and components after you have certified them
  • take into account outcomes from complaints and random re-inspections since your last review.
1.2
Correct technical decisions
You and your staff are consistently correct in determining if the vehicles or components you are asked to certify comply with all Transport Agency requirements, taking into account technical information provided by the Transport Agency, such as the VIRM: Entry certification.

The Transport Agency will:

  • talk to you and your staff
  • observe you and your staff at work
  • inspect vehicles and components after you have certified them
  • inspect inspection and certification documents you use and complete
  • inspect information you enter into the NZTA computer system.

The Transport Agency may:

  • take into account outcomes from complaints and random reinspections since your last review.
1.3
Technical competence

You and your staff are competent in all technical aspects of the inspection and certification work carried out by your business.

For example, you must be competent in:

  • the technical assessment of vehicles and components
  • all Transport Agency requirements (including VIRM requirements)
  • Transport Agency guidelines
  • the operation of the equipment that you use.

The Transport Agency will:

  • talk to you and your staff
  • ask questions to check your competence
  • observe you and your staff at work
  • inspect inspection and certification documents
  • inspect your Training record.

The Transport Agency may administer short tests.

Scores

  Score
0
1
2
3
1.1
Correct certification outcomes

You and your staff regularly do not achieve the correct certification outcomes.

This means you regularly:

  • do not identify vehicles (including vehicle classes) or components correctly
  • certify vehicles or components that do not comply with all Transport Agency requirements.

The incorrect certification outcomes are likely to compromise the safety of vehicle occupants or other road users, or the vehicle does not meet the required standards.

You and your staff sometimes do not achieve the correct certification outcomes.

This means you sometimes:

  • do not identify vehicles (including vehicle classes) or components correctly
  • certify vehicles or components that do not comply with all Transport Agency requirements, or
  • deny certification of vehicles or components that do comply with all Transport Agency requirements.

The incorrect certification outcomes may compromise the safety of vehicle occupants or other road users, or the vehicle does not meet the required standards.

You and your staff usually achieve the correct certification outcomes.

This means you usually:

  • identify vehicles (including vehicle classes) or components correctly, and
  • certify vehicles or components only if they comply with all Transport Agency requirements, and
  • do not certify vehicles or components that do not comply with all Transport Agency requirements, and
  • do not deny certification of vehicles or components if they comply with all Transport Agency requirements.

Any incorrect certification outcomes, although technicaly incorrect, do not compromise the safety of vehicle occupants or other road users.

You and your staff consistently achieve the correct certification outcomes.

This means you:

  • consistently identify vehicles (including vehicle classes) or components correctly, and
  • consistently certify vehicles or components only if they comply with all Transport Agency requirements, and
  • consistently do not certify vehicles or components that do not comply with all Transport Agency requirements, and
  • do not deny certification of vehicles or components if they comply with all Transport Agency requirements.
1.2
Correct technical decisions
Your score here is the average score of your performance in meeting the Transport Agency’s expectations for ‘Correct technical decisions’ in the Technical part of the PRS.
1.3
Technical competence
Your score here is the average score of your performance in meeting the Transport Agency’s expectations for ‘Technical competence’ in the Technical part of the PRS.

2 Adminstrative performance

Requirements

  What the Transport Agency expects of you How the Transport Agency will assess your performance
2.1
Correct use of inspection and certification documents

Inspection and certification documents are:

  • Controlled documents – documents you must use and complete as part of your inspection and certification work, such as WoF labels, checksheets or certificates
  • Uncontrolled documents – any documents developed by you as part of your inspection and certification work, such as brake machine print-outs
  • External documents – any documents supplied by outside parties (eg vehicle owners, repairers or manufacturers) that you rely on in your inspection and certification work, such as exemption notices or engineers’ certificates. 

The Transport Agency will:

  • talk to you and your staff
  • observe you and your staff at work
  • inspect inspection and certification documents that you use and complete
  • inspect your external documents.

The Transport Agency may:

  • take into account outcomes from complaints and random reinspections since your last review.
2.2
Correct entry of inspection and certification information

You and your staff consistently comply with all Transport Agency requirements (including VIRM requirements) for entering inspection and certification information into the Transport Agency computer system.

This means that you consistently enter inspection and certification information into the Transport Agency computer system correctly and promptly. For example, you enter the required information on the day the vehicles were inspected and before they leave your premises.

The Transport Agency will:

  • talk to you and your staff
  • observe you and your staff at work
  • inspect information you enter into the Transport Agency computer system
  • compare information you collect on inspection and certification documents with information you enter into the Transport Agency computer system
  • monitor when you enter information to identify patterns of late entry.

The Transport Agency may:

  • take into account outcomes from complaints and random re-inspections since your last review.
2.3
Administrative competence

You and your staff are competent in all administrative aspects of the inspection and certification work carried out by your business.

For example, you must be competent in:

  • completing checksheeets and other relevant inspection and certification documentation
  • entering information into the Transport Agency computer system using WoF Online or LANDATA
  • using the PRS, including maintaining the specified records.

The Transport Agency will:

  • talk to you and your staff
  • ask questions to check your competence
  • observe you and your staff at work
  • inspect inspection and certification documents
  • inspect the records you keep
  • inspect your Training record.

Scores

  Score
0
1
2
3
2.1
Correct use of inspection and certification documents

You and your staff regularly do not comply with the Transport Agency’s requirements (including VIRM requirements) relating to inspection and certification documents.

This means you regularly do not:

  • use the correct controlled documents for the task, or
  • complete the controlled documents, or
  • obtain the external documents you need to make and/or prove your certification decisions, or
  • develop the uncontrolled documents your need to make and/or prove your certification decisions, or
  • handle inspection and certification documents appropriately or as required, eg attach them to vehicles, hand them to vehicle owners, or file them.

You and your staff sometimes do not comply with the Transport Agency’s requirements (including VIRM requirements) relating to inspection and certification documents.

This means you sometimes do not:

  • use the correct controlled documents for the task, or
  • obtain the external documents you need to make and/or prove your certification decisions, or
  • develop the uncontrolled documents your need to make and/or prove your certification decisions, or
  • handle inspection and certification documents appropriately or as required, eg attach them to vehicles, hand them to vehicle owners, or file them

OR

You regularly do not:

  • complete the controlled documents fully, accurately and legibly (originals and duplicates), or
  • ensure that all controlled documents are signed, if required, by the appropriate person(s).

You and your staff usually comply with the Transport Agency’s requirements (including VIRM requirements) relating to inspection and certification documents.

This means you consistently:

  • use the correct controlled documents for the task, and
  • obtain the external documents you need to make and/or prove, your certification decisions, and
  • obtain all required external documents such as statements of compliance, export certificates, repair certificates or proof of previous registration that you need to make and/or prove your certification decisions, and
  • handle all inspection and certification documents appropriately or as required, eg you attach them to vehicles, hand them to vehicle owners or file them.

However, you occasionally do not:

  • complete the controlled documents (originals and duplicates) fully, accurately and legibly, or
  • ensure that all controlled documents are signed, if required, by the appropriate person(s).

You and your staff consistently comply with the Transport Agency’s requirements (including VIRM requirements) relating to inspection and certification documents.

This means you consistently:

  • use the correct controlled documents for the task, ie the ones specified by law or required or approved by the Transport Agency, and
  • complete the controlled documents fully, accurately and legibly (originals and duplicates) with particular attention to details such as vehicles’ VIN or chassis numbers, and registration numbers, and
  • ensure that all controlled documents are signed, if required, by the appropriate person(s), and
  • develop any uncontrolled documents you need to make and/or prove your certification decisions, and
  • obtain any external documents you need to make and/or prove your certification decisions, and
  • handle all inspection and certification documents appropriately or as required, eg you attach them to vehicles, hand them to vehicle owners, or file them.
2.2
Correct entry of inspection and certification information VIRM

You and your staff regularly do not comply with all Transport Agency requirements (including VIRM requirements) for entering inspection and certification information into the LANDATA computer system.

This means you:

  • regularly make serious mistakes when entering inspection and certification information into the LANDATA system, or
  • regularly fail to enter vehicle notes or specialist certificates into the LANDATA system.

You and your staff sometimes do not comply with all Transport Agency requirements (including VIRM requirements) for entering inspection and certification information into the LANDATA computer system.

This means you:

  • sometimes do not enter failure notes or specialist certificates into the IVcert screen, or
  • occasionally make a more serious mistake such as creating a record for a vehicle that does not have matching history without highlighting the fact in ‘Notes’.

You and your staff usually comply with all Transport Agency requirements for entering inspection and certification information into the LANDATA computer system.

This means that you:

  • consistently enter inspection and certification information into the Transport Agency computer system correctly and promptly, but you make the occasional minor mistake (such as entering a vehicle’s colour or sub-model incorrectly), or
  • occasionally fail to enter required special notes for exempt vehicles, left-hand drive vehicles or when documents are returned to the vehicle’s owner.

You and your staff consistently comply with all Transport Agency requirements (including VIRM requirements) for entering inspection and certification information into the LANDATA computer system.

This means that you consistently enter inspection and certification information including vehicle attributes, notes and specialist certifications into the LANDATA computer system correctly and promptly.

2.3
Administrative competence

You and your staff can demonstrate little or no competence in the administrative and pre-registration aspects of the inspection and certification work carried out by your business.

This means you and/or most of your staff have significant gaps in knowledge of, or skills in:

  • the correct use of inspection and certification documents, or
  • entering inspection and certification information into the Transport Agency computer system, or
  • the pre-registration process, or
  • using the PRS.

You and your staff can demonstrate some competence in the administrative aspects of the inspection and certification work carried out by your business.

This means you and/or some of your staff have some gaps in knowledge of, or skills in:

  • the correct use of inspection and certification documents, or
  • entering inspection and certification information into the Transport Agency computer system, or
  • the pre-registration process, or
  • using the PRS.

You and your staff can demonstrate adequate competence in the administrative aspects of the inspection and certification work carried out by your business.

This means you and your staff can demonstrate adequate knowledge of, and skills in:

  • the correct use of inspection and certification documents, and
  • entering inspection and certification information into the Transport Agency computer system, and
  • the pre-registration process.

However, you and/or some of your staff have minor gaps in knowledge of, and skills in, using the PRS.

You and your staff can demonstrate comprehensive competence in all administrative aspects of the inspection and certification work carried out by your business.

This means you and your staff can demonstrate comprehensive knowledge of, and skills in:

  • the correct use of inspection and certification documents, and
  • entering inspection and certification information into the Transport Agency computer system, and
  • the pre-registration process, and
  • using the PRS.

3 Resources

Requirements

  What the Transport Agency expects of you How the Transport Agency will assess your performance
3.1
Facilities

Your facilities:

  • meet all Transport Agency requirements (including VIRM requirements)
  • are adequate for the nature and volume of the inspection and certification work carried out by your business, eg in terms of access, size, lighting, flooring, features (such as a pit), layout, condition and organisation.

The Transport Agency will inspect your facilities.

3.2
Technical equipment

On your premises you have, or have ready access to, all technical equipment (including any user manuals) required for your certification work, or required by the Transport Agency, such as tools and inspection equipment.

The equipment is in good condition and working order.

The Transport Agency will inspect your technical equipment.

3.3
Administration equipment

On your premises you have, or have ready access to, all administration equipment (including any user manuals) required for your certification work, or required by the Transport Agency, such as a computer, specified software and access to WoF Online or LANDATA.

The equipment is in good condition and working order.

The Transport Agency will inspect your administration equipment.

3.4
Technical information

On your premises you have, or have ready access to, all technical information required by the Transport Agency, such as VIRMs.

The information is complete, up to date and in good condition.

The Transport Agency will inspect your technical information.
3.5
Controlled inspection and certification documents

You have available blank copies of all controlled documents and must use and complete these as part of your inspection and certification work.

Any controlled documents you have developed yourself, if permitted by the Transport Agency, comply with Transport Agency requirements.

The Transport Agency will inspect your controlled inspection and certification documents.
3.6
Inspection and certification staff

All staff doing inspection and certification work hold current and appropriate Transport Agency appointments for the inspection and certification work they carry out, unless you are specifically permitted by the Transport Agency to delegate specified parts of your inspection and certification work to staff who are not required to hold Transport Agency appointments.

All staff to whom you have delegated inspection and certification work are competent and qualified to do the specified work.

All staff who are required to drive vehicles as part of their work hold current driver licences for the types of vehicles they are required to drive.

The Transport Agency will:

  • talk to you and your staff
  • observe you and your staff at work
  • inspect your staff record
  • inspect your delegation record
  • inspect driver licences.

Scores

  Score
0
1
2
3
3.1
Facilities

Your facilities:

  • do not meet the Transport Agency requirements (including VIRM requirements), or
  • are inadequate for the nature and volume of the inspection and certification work carried out by your business.

This means your facilities are deficient to an extent that they adversely affect your certification decisions or certification outcomes.

Your facilities:

  • may meet the Transport Agency requirements (including VIRM requirements), but
  • are barely adequate for the nature and volume of the inspection and certification work carried out by your business.

This means there are serious deficiencies in your facilities that require improvement. Serious deficiencies are those that, if not improved promptly, may adversely affect your certification decisions or certification outcomes.

Your facilities:

  • meet all Transport Agency requirements (including VIRM requirements), and
  • are adequate for the nature and volume of the inspection and certification work carried out by your business.

However, there are minor aspects in your facilities that could be improved. Minor aspects are those that do not adversely affect your certification decisions or certification outcomes but that, if improved, would make your inspection and certification work easier or more efficient.

For example, there may be areas where lighting could be improved, or where your facilities could be better organised.

Your facilities:

  • meet all Transport Agency requirements (including VIRM requirements), and
  • are fully adequate for the nature and volume of the inspection and certification work carried out by your business, eg in terms of access, size, lighting, flooring, features (such as a pit), layout, condition and organisation.
3.2
Technical equipment

Your score here is the average score of your performance in meeting the Transport Agency’s expectations for ‘Technical equipment’ in the Technical part of the PRS.

3.3
Administration equipment

You do not have, or do not have ready access to, the administration equipment (including any user manuals) required for your inspection and certification work, or required by the Transport Agency, such as a computer, specified software and access to LANDATA; there is no VIN embossing machine on site.

OR

Most equipment you do have, or have ready access to, is not in working order.

On your premises you have, or have ready access to, all administration equipment (including any user manuals) required for your inspection and certification work, or required by the Transport Agency, such as a computer, specified software and access to LANDATA.

However, some equipment is not in working order.

On your premises you have, or have ready access to, all administration equipment (including any user manuals) required for your inspection and certification work, or required by the Transport Agency, such as a computer, specified software and access to LANDATA; there is a VIN embossing machine on site.

The equipment is in working order but some is not in good condition.

On your premises you have, or have ready access to, all administration equipment (including any user manuals) required for your inspection and certification work, or required by the Transport Agency, such as a computer, specified software and access to LANDATA; there is a VIN embossing machine on site.

The equipment is in good condition and working order.

3.4
Technical information
You do not have, or do not have ready access to, the technical information required by the Transport Agency.

On your premises you have, or have ready access to, all technical information required by the Transport Agency.

The information is complete but not up to date.

For example, when you receive amendments to an inspection manual, you do not update the manual as promptly as you could.

On your premises you have, or have ready access to, all technical information required by the Transport Agency.

The information is complete and up to date but not in good condition.

For example, pages from an inspection manual may have been taken out at some stage and then put back in the wrong place (ie the pages are no longer in the right order, making it difficult to find items).

On your premises you have, or have ready access to, all technical information required by the Transport Agency, such as VIRMs.

The information is complete, up to date and in good condition.

3.5
Controlled inspection and certification documents

You do not have available blank copies of most or any of the controlled documents you must use and complete as part of your inspection and certification work

OR

You use controlled documents you have developed yourself but:

  • you do not have permission from the Transport Agency to develop your own documents, or
  • the documents do not comply with Transport Agency requirements.

You do not have available blank copies of some controlled documents you must use and complete as part of your inspection and certification work

OR

Some controlled documents you have developed yourself do not fully comply with Transport Agency requirements.

You do not have available blank copies of most or any of the controlled documents you must use and complete as part of your inspection and certification work

OR

You use controlled documents you have developed yourself but:

  • you do not have permission from the Transport Agency to develop your own documents, or
  • the documents do not comply with Transport Agency requirements.

You do not have available blank copies of some controlled documents you must use and complete as part of your inspection and certification work

OR

Some controlled documents you have developed yourself do not fully comply with Transport Agency requirements.

3.6
Certification staff

Some staff doing inspection and certification work do not hold current and appropriate Transport Agency appointments for the inspection and certification work they carry out because they:

  • have never held any relevant Transport Agency appointments, or
  • are currently suspended, or
  • were suspended and have not been reappointed by the Transport Agency, or
  • have had their appointments revoked, or
  • have previously held relevant Transport Agency appointments but these have lapsed a considerable time ago

OR

You have delegated or contracted out work without Transport Agency permission.

Some staff doing inspection and certification work do not hold current and appropriate Transport Agency appointments for the inspection and certification work they carry out, but they have previously held relevant Transport Agency appointments which have only recently lapsed

OR

Some staff to whom you have rightfully delegated inspection and certification work do not have the required level of competence

OR

Some staff who are required to drive vehicles as part of their work do not hold current driver licences for the types of vehicles they are required to drive.

Some staff doing inspection and certification work do not hold current and appropriate Transport Agency appointments for the inspection and certification work they carry out because they:

  • have never held any relevant Transport Agency appointments, or
  • are currently suspended, or
  • were suspended and have not been reappointed by the Transport Agency, or
  • have had their appointments revoked, or
  • have previously held relevant Transport Agency appointments but these have lapsed a considerable time ago

OR

You have delegated or contracted out work without Transport Agency permission.

Some staff doing inspection and certification work do not hold current and appropriate Transport Agency appointments for the inspection and certification work they carry out, but they have previously held relevant Transport Agency appointments which have only recently lapsed

OR

Some staff to whom you have rightfully delegated inspection and certification work do not have the required level of competence

OR

Some staff who are required to drive vehicles as part of their work do not hold current driver licences for the types of vehicles they are required to drive.

4 Management

Requirements

  What the Transport Agency expects of you How the Transport Agency will assess your performance
4.1
Management of competence

You have a coordinated approach to managing your competence in all aspects of your inspection and certification work.

This means you:

  • provide for the proper induction of new staff, including temporary staff who fill in for you when you are away (if any), by making them familiar with your facilities and equipment, and the way things are done in your business
    (Note 1)
  • regularly assess your level of competence and that of your staff
  • make sure your competence and that of your staff is maintained at a high level, ie you and your staff are aware of, and competent in dealing with, new legal requirements and updates to technical information, new technologies, and new equipment.

You complete and keep an Induction record for each new staff member, including temporary staff.

You keep an up-to-date Training record, listing any internal and external training received by you and your staff.

The Transport Agency will:

4.2
Management of facilities

You have a coordinated approach to managing your facilities. Your approach ensures that your facilities are kept tidy, clean, organised and in good condition.

You display your Transport Agency site authorisation certificate where your customers can easily see it.

The Transport Agency will:

  • talk to you and your staff
  • inspect your facilities.
4.3
Management of equipment

You have a coordinated approach to managing your equipment. Your approach ensures that equipment is:

  • available in sufficient numbers for the volume of inspection and certification work carried out by your business and the number of staff using the equipment
  • stored as specified by the manufacturer and in locations where you and your staff have easy access
  • actually used by you and your staff for its intended purpose
  • maintained as specified by the manufacturer
  • calibrated as specified by the manufacturer, or as required by the Transport Agency.

You keep an up-to-date Equipment record for each piece of equipment that requires regular maintenance or calibration.

The Transport Agency will:

  • talk to you and your staff
  • inspect your equipment
  • observe you and your staff at work
  • look at your inspection and certification volumes (to check that enough equipment is available)
  • inspect where and how your equipment is stored
  • inspect your Equipment record.
4.4
Management of technical information

You have a coordinated approach to managing your technical information (such as VIRMs). Your approach ensures that technical information is:

  • updated promptly when you receive updates from the Transport Agency
  • stored so you and your staff have easy access
  • maintained in good condition.

You keep an up-to-date Technical information record.

The Transport Agency will:

  • talk to you and your staff
  • inspect your technical information and the locations where you keep it
  • inspect your Technical information record.
4.5
Management of inspection and certification documents

You have a coordinated approach to managing your inspection and certification documents. Your approach ensures that:

  • all inspection and certification documents are kept safe at all times and out of reach of the public
  • unused controlled documents are always kept out of reach of the public and, outside business hours, are locked in a secured safe, locker, or strong cupboard or drawer
  • all inspection and certification documents are filed so that they can be easily retrieved
  • you keep sufficient stock of the inspection and certification documents needed for your inspection and certification work
  • the loss or theft of any controlled documents is reported immediately to the Police and the Transport Agency using the Notification of lost or stolen controlled documents form in the Master records section.

You keep an up-to-date Controlled document record.

The Transport Agency will:

  • talk to you and your staff
  • inspect your used and unused inspection and certification documents and the locations where you keep them
  • inspect the way you file your inspection and certification documents
  • inspect your Controlled document record.
4.6
Management of electronic inspection and certification information

You have a coordinated approach to managing your electronic inspection and certification information. Your approach ensures that:

  • all electronic inspection and certification information is kept safe at all times
  • all computers from which you access the Transport Agency computer system are out of reach of the public and/or access to your computers is protected by password
  • all user names and passwords, if recorded on paper, are kept safe and out of reach of the public
  • passwords used to protect your computers from public access are changed regularly
  • you have backup copies or hard copies of any electronic information relevant to your inspection and certification work.

The Transport Agency will:

  • talk to you and your staff
  • observe you and your staff at work
  • inspect the location and set-up of your computers, and the storage of user names and passwords
  • inspect the backup copies or hard copies you keep of your electronic inspection and certification information.
4.7
Management of inspection and certification staff

You have a coordinated approach to managing your staff. Your approach ensures that:

  • certification decisions are made only by staff who hold current and appropriate Transport Agency appointments
  • the number of staff carrying out inspection and certification work is adequate for the nature and volume of inspection and certification work carried out by your business
  • vehicles are driven only by staff who hold current and appropriate driver licences
  • there is effective communication and teamwork in your business at and across all levels and in all directions
  • responsibilities are clearly defined and all staff know who is responsible for what.

You keep a Staff record listing all staff carrying out certification work. Your Staff record is up to date and coincides with the Transport Agency’s record of inspectors working in your business.

You keep an up-to-date Delegation record.

You display all Transport Agency inspector appointment certificates where your customers can easily see them.

The Transport Agency will:

  • talk to you and your staff and any contractors
  • observe you and your staff at work
  • inspect your Staff recordord, your Delegation record and other relevant records.
4.8
Management of time

You allocate enough time for you and your staff to carry out your inspection and certification work, allowing for the complexity of the work, your facilities, the available equipment, and your and your staff’s level of skill.

This means you and your staff:

  • are comfortable with the time allocated and actually spent on inspection and certification work, and
  • do not feel under pressure to perform within time frames that are unreasonably tight.

The Transport Agency will:

  • talk to you and your staff
  • observe you and your staff at work
  • look at your inspection and certification volumes.
Note 1

Does not apply to a one-person business if no inspection and certification work is carried out when the inspector is away.

Scores

  Score
0
1
2
3
4.1
Management of competence

Your approach to managing your and your staff’s competence in all aspects of your inspection and certification work is inadequate.

This means you:

  • do not provide for the proper induction of new staff, including any temporary staff, or
  • do not assess your and your staff’s level of competence, or
  • make little or no effort to maintain your and your staff’s competence (if staff go on any training courses, it is on their own initiative).

Your approach to managing your and your staff’s competence in all aspects of your inspection and certification work is barely adequate.

This means you:

  • often do not provide for the proper induction of new staff, including any temporary staff, or
  • do not assess your and your staff’s level of competence on a regular basis, or
  • make only limited efforts to maintain your and your staff’s competence at a high level (for example, you consider yourself too busy to go on training courses)

OR

You do not keep a Training record.

Your approach to managing your and your staff’s competence in all aspects of your inspection and certification work is adequate.

This means you usually:

  • provide for the proper induction of new staff, including temporary staff who fill in for you when you’re away (if any), by making them familiar with your facilities and equipment and the way things are done in your business, and
  • assess your and your staff’s level of competence on a regular basis, and
  • make sure, for example by attending regular training courses, that your and your staff’s competence is maintained at a high level, ie you and your staff are aware of, and competent in dealing with, new legal requirements and updates to technical information, and are competent in dealing with new technologies and new equipment.

However, you do not always:

Your approach to managing your and your staff’s competence in all aspects of your inspection and certification work is well coordinated.

This means you consistently:

  • provide for the proper induction of new staff, including temporary staff who fill in for you when you’re away (if any), by making them familiar with your facilities and equipment and the way things are done in your business, and
  • assess your and your staff’s level of competence on a regular basis, and
  • make sure, for example by attending regular training courses, that your and your staff’s competence is maintained at a high level, ie you and your staff are aware of, and are competent in dealing with, new legal requirements and updates to technical information new technologies and new equipment.

You complete and keep an Induction record for each new staff member, including temporary staff.

You keep an up-to-date Training record, listing any internal and external training received by you and your staff.

4.2
Management of facilities

Your approach to managing your facilities is inadequate.

This means you make little or no effort to keep the facilities tidy, clean, organised or maintained in good condition.

Your approach to managing your facilities is barely adequate.

This means you:

  • make only limited efforts to keep the premises tidy, clean, organised or maintained in good condition, or
  • you do not display your Transport Agency site authorisation certificate where your customers can easily see it.

Your approach to managing your facilities is adequate.

This means you usually:

  • make sure your facilities are kept tidy, clean, organised and maintained in good condition, and
  • display your Transport Agency site authorisation certificate where your customers can easily see it.

Your approach to managing your facilities is well coordinated.

This means you consistently:

  • make sure your facilities are kept tidy, clean, organised and maintained in good condition, and
  • display your Transport Agency site authorisation certificate where your customers can easily see it.
4.3
Management of equipment

Your approach to managing your equipment is inadequate.

This means little or no equipment is:

  • available in sufficient numbers for the volume of inspection and certification work carried out by your business and the number of staff using it, or
  • stored as specified by the manufacturer or in locations where you and your staff have easy access, or
  • used as intended, or
  • maintained or calibrated as specified by the manufacturer or as required by the Transport Agency.

Your approach to managing your equipment is barely adequate.

This means you make sure equipment is available in sufficient numbers for the volume of inspection and certification work carried out by your business and the number of staff using it.

However, you often do not make sure equipment is:

  • stored as specified by the manufacturer or in locations where you and your staff have easy access, or
  • used as intended, or
  • maintained or calibrated as specified by the manufacturer or as required by the Transport Agency

OR

You do not keep an Equipment record for some or any equipment that requires regular maintenance or calibration.

Your approach to managing your equipment is adequate.

This means you usually make sure equipment is:

  • available in sufficient numbers for the volume of inspection and certification work carried out by your business and the number of staff using the equipment, and
  • stored as specified by the manufacturer and in locations where you and your staff have easy access, and
  • actually used by you and your staff for its intended purpose, and
  • maintained as specified by the manufacturer, and
  • calibrated as specified by the manufacturer, or as required by the Transport Agency.

You keep an Equipment record for each piece of equipment that requires regular maintenance or calibration, but you do not always keep your Equipment record up to date.

Your approach to managing your equipment is well coordinated.

This means you consistently make sure equipment is:

  • available in sufficient numbers for the volume of inspection and certification work carried out by your business and the number of staff using the equipment, and
  • stored as specified by the manufacturer and in locations where you and your staff have easy access, and
  • actually used by you and your staff for its intended purpose, and
  • maintained as specified by the manufacturer, and
  • calibrated as specified by the manufacturer, or as required by the Transport Agency.

You keep an up-to-date Equipment record for each piece of equipment that requires regular maintenance or calibration.

4.4
Management of technical information

Your approach to managing your technical information is inadequate.

This means you make little or no effort to manage your technical information.

For example, some technical information may not have been updated for a considerable time.

Your approach to managing your technical information is barely adequate.

This means although you make some efforts to manage your technical information, you often do not:

  • update technical information promptly when you receive updates from the Transport Agency, or
  • store technical information so you have easy access

OR

You do not keep a Technical information record.

Your approach to managing your technical information is adequate.

This means you usually make sure your technical information is:

  • updated promptly when you receive updates from the Transport Agency, and
  • stored so you and your staff have easy access.

However, you do not always:

Your approach to managing your technical information is well coordinated.

This means you consistently make sure your technical information is:

  • updated promptly when you receive updates from the Transport Agency, and
  • stored so you and your staff have easy access, and
  • maintained in good condition.

You keep an up-to-date Technical information record.

4.5
Management of inspection and certification documents

Your approach to managing your certification documents is inadequate.

This means you do not:

  • keep inspection and certification documents (including VIN plates) safe, or
  • keep unused controlled documents out of reach of the public, or
  • lock unused controlled documents in a secured safe, locker, or strong cupboard or drawer outside business hours

OR

You lost controlled documents, or had controlled documents stolen, but did not report the loss or theft to the NZ Police or the Transport Agency.

Your approach to managing your inspection and certification documents is barely adequate.

This means although you make some efforts to manage your certification documents, you often do not:

  • keep inspection and certification documents (including VIN plates) safe, or
  • keep unused controlled documents out of reach of the public, or
  • lock unused controlled documents in a secured safe, locker, or strong cupboard or drawer outside business hours, or
  • file your inspection and certification documents so that they can be easily retrieved, or
  • keep sufficient stock of controlled documents

OR

You do not keep a Controlled document record or VIN plate register.

Your approach to managing your certification documents is adequate.

This means you usually make sure that:

  • inspection and certification documents (including VIN plates) are kept safe at all times, and
  • unused controlled documents are always kept out of reach of the public and, outside business hours, are locked in a secured safe, locker, or strong cupboard or drawer, and
  • all inspection and certification documents are filed so that they can be easily retrieved, and
  • you keep sufficient stock of the inspection and certification documents needed for your inspection and certification work, and
  • the loss or theft of any controlled documents is reported immediately to the Police and the Transport Agency but you do not always report the loss or theft to the Transport Agency using the Notification of lost or stolen controlled documents form in the Master records section at the back of this manual.

However, you do not always keep your Controlled document record or VIN plate register up to date.

Your approach to managing your certification documents is well coordinated.

This means you consistently make sure that:

  • inspection and certification documents (including VIN plates) are kept safe at all times, and
  • unused controlled documents are always kept out of reach of the public and, outside business hours, are locked in a secured safe, locker, or strong cupboard or drawer, and
  • all inspection and certification documents are filed so that they can be easily retrieved, and
  • you keep sufficient stock of the inspection and certification documents needed for your inspection and certification work, and
  • the loss or theft of any controlled documents is reported immediately to the Police and the Transport Agency on the Notification of lost or stolen controlled documents form in the Master records section at the back of this manual.

You keep an up-to-date Controlled document record and VIN plate register.

4.6
Management of electronic inspection and certification information

Your approach to managing your electronic inspection and certification information is inadequate.

This means you make little or no effort to ensure that electronic inspection and certification information is kept safe.

Your approach to managing your electronic inspection and certification information is barely adequate.

This means that although you make some efforts to ensure that electronic inspection and certification information is kept safe, you often do not:

  • have your computers, if located within reach of the public, protected by password, or
  • keep your user names and passwords safe and out of reach of the public, or
  • change your passwords on a regular basis.

Your approach to managing your electronic inspection and certification information is adequate.

This means you usually make sure that:

  • electronic inspection and certification information is kept safe at all times, and
  • all computers from which you access the Transport Agency’s computer system are out of reach of the public and/or access to your computers is protected by password, and
  • all user names and passwords, if recorded on paper, are kept safe and out of reach of the public, and
  • passwords used to protect your computers from public access are changed regularly.

However, you do not always keep backup copies or hard copies of electronic information relevant to your inspection and certification work, such as CAD drawings.

Your approach to managing your electronic inspection and certification information is well coordinated.

This means you consistently make sure that:

  • electronic inspection and certification information is kept safe at all times, and
  • all computers from which you access the Transport Agency’s computer system are out of reach of the public and/or access to your computers is protected by password, and
  • all user names and passwords, if recorded on paper, are kept safe and out of reach of the public, and
  • passwords used to protect your computers from public access are changed regularly, and
  • you have backup copies or hard copies of any electronic information relevant to your inspection and certification work, such as CAD drawings.
4.7
Management of inspection and certification staff

Your approach to managing your staff is inadequate.

This means you make little or no effort to make sure that:

  • certification decisions are made only by staff who hold current and applicable Transport Agency appointments, or
  • the number of staff carrying out inspection and certification work is adequate for the nature and volume of inspection and certification work carried out by your business.

Your approach to managing your staff is barely adequate.

This means although you make some efforts to manage your staff, you regularly fail to make sure that:

  • certification decisions are made only by staff who hold current and applicable Transport Agency appointments, or
  • the number of staff carrying out inspection and certification work is adequate for the nature and volume of inspection and certification work carried out by your business, or
  • vehicles are driven only by staff who hold current and appropriate driver licences, or
  • there is effective communication and teamwork in your business at and across all levels and in all directions, or
  • responsibilities are clearly defined and all staff know who is responsible for what

OR

You do not keep a Staff record or a Delegation record.

Your approach to managing your staff is adequate.

This means you usually make sure that:

  • certification decisions are made only by staff who hold current and applicable Transport Agency appointments, and
  • the number of staff carrying out inspection and certification work is adequate for the nature and volume of inspection and certification work carried out by your business, and
  • vehicles are driven only by staff who hold current and appropriate driver licences, and
  • there is effective communication and teamwork in your business at and across all levels and in all directions, and
  • responsibilities are clearly defined and all staff know who is responsible for what.

However, you do not:

  • always keep your Staff record or your Delegation record up to date, or
  • display all Transport Agency inspector appointment certificates where your customers can see them.

Your approach to managing your staff is well coordinated.

This means you consistently make sure that:

  • certification decisions are made only by staff who hold current and applicable Transport Agency appointments, and
  • the number of staff carrying out inspection and certification work is adequate for the nature and volume of inspection and certification work carried out by your business, and
  • vehicles are driven only by drivers who hold current and appropriate driver licences, and
  • there is effective communication and teamwork in your business at and across all levels and in all directions, and
  • responsibilities are clearly defined and all staff know who is responsible for what.

You keep a Staff record listing all staff carrying out inspection and certification work. Your Staff record is up to date and coincides with the Transport Agency’s record of inspectors working in your business.

You keep an up-to-date Delegation record.

You display all Transport Agency inspector appointment certificates where your customers can easily see them.

4.8
Management of time

You do not allocate enough time for you and your staff to carry out your inspection and certification work.

Many of your staff:

  • are not comfortable with the time allocated and actually spent on inspection and certification work, or
  • feel under pressure to perform within time frames that are unreasonably tight.

You do not always allocate enough time for you and your staff to carry out your inspection and certification work.

Staff regularly complain about time frames that are too tight to carry out their inspection and certification work properly.

You generally allocate enough time for you and your staff to carry out your inspection and certification work, allowing for the complexity of the work, your facilities, the available equipment, and your and your staff’s level of skill.

However, less experienced staff sometimes feel under pressure to perform within the same tight time frames as experienced staff.

You allocate enough time for you and your staff to carry out your inspection and certification work, allowing for the complexity of the work, your facilities, the available equipment, and your and your staff’s level of skill.

This means you and your staff:

  • are comfortable with the time allocated and actually spent on inspection and certification work, and
  • do not feel under pressure to perform within time frames that are unreasonably tight.

5 Performance improvement

Requirements

  What the Transport Agency expects of you How the Transport Agency will assess your performance
5.1
Commitment to continuous improvement

You and your staff are committed to improving your inspection and certification work.

This means that you actively:

  • identify problems and opportunities to improve
  • assess the cause of problems and prioritise problems and opportunities
  • address problems and opportunities according to priorities and available resources.

You keep an Improvement record and record problems and opportunities to improve raised by you and your staff. All follow-up activities have been recorded in the Improvement record.

The Transport Agency will:

5.2
Regular self-assessments

You regularly assess how well you and your staff meet the Transport Agency’s expectations as set out in the PRS.

The frequency of self-assessments is appropriate to the size of your business and the inspection and certification work carried out by your business. This means you carry out a self-assessment at least once a year and within two months before a scheduled review.

You record each self-assessment by completing a Self-assessment record which is filed in this folder.

You record any problems or opportunities to improve that you identify during self-assessments in your Improvement record for follow-up.

The Transport Agency will:

  • talk to you and your staff
  • inspect your Self-assessment record
  • inspect your Improvement record to check that any problems or opportunities to improve identified during self-assessments have been recorded for follow-up.
5.3
Correct handling of complaints

You and your staff are open to complaints and regard them as opportunities to improve.

This means you:

  • display or provide to your customers your complaints policy, including information on how to lodge a complaint and your customers’ right to complain to the Transport Agency
  • handle complaints in accordance with Transport Agency requirements.

You keep a Complaints record, in which all verbal and written complaints are recorded.

You record any problems or opportunities to improve that you identify in the investigation of complaints in your Improvement record for follow-up.

The Transport Agency will:

  • inspect your complaints policy
  • talk to you and your staff
  • inspect your Complaints record to check that any complaints against you, including any complaints raised with the Transport Agency, have been recorded and handled in accordance with Transport Agency requirements
  • inspect your Improvement record to check that any problems or opportunities to improve identified in the investigation of complaints have been recorded for follow-up.
5.4
Commitment to the PRS

You and your staff are committed to making the PRS work in and for your business.

This means you:

  • actively use the system for improving your inspection and certification work
  • are open about your problems and achievements
  • fully cooperate during regular performance reviews.

The Transport Agency will:

  • talk to you
  • assess your level of cooperation during reviews.

Scores

  Score
0
1
2
3
5.1
Commitment to continuous improvement

You and/or most of your staff show little or no commitment to improving your inspection and certification work.

This means you and most of your staff do not make efforts to identify problems and opportunities to improve. You are often not even aware of the problems you have.

You and most of your staff show some commitment to improving your inspection and certification work.

This means you are aware of:

  • some problems and opportunities to improve, and
  • the causes of the problems and what you need to do to address them.

However, although you and some of your staff work around the problems, you regularly do not:

  • record them in your Improvement record, or
  • work actively to address them properly or record training for identified problems.

You and most of your staff show an adequate level of commitment to improving your inspection and certification work.

This means you:

  • actively identify and prioritise problems and opportunities to improve, and
  • assess the cause of problems and identify what you need to do to address them.

However, you do not always:

  • address the problems and opportunities as promptly as you could, or
  • record all problems, opportunities and follow-ups in your Improvement record
  • update staff training records when required.

You and your staff are fully committed to improving your inspection certification work.

This means you:

  • actively identify and prioritise problems and opportunities to improve, and
  • assess the cause of problems and identify what you need to do to address them, and
  • address problems and opportunities according to available resources, and
  • record all problems, opportunities and follow-ups in your Improvement record
  • update staff training records when required.
5.2
Regular self-assessments

You do not assess how well you and your staff meet the Transport Agency’s expectations as set out in the PRS.

This means there is no evidence of your carrying out entry certification self-assessments.

You sometimes assess how well you and your staff meet the Transport Agency’s expectations as set out in the PRS.

This means you carry out some entry certification self-assessments but you do not:

  • carry out self-reviews regularly (ie at least once a year and before scheduled reviews), or
  • document self-assessments by completing a Self-assessment record.

You regularly assess how well you and your staff meet the Transport Agency’s expectations as set out in the PRS.

This means you carry out self-assessments at least once a year (or more often as appropriate to the size of your business and the inspection and certification work carried out by your business).

However, you do not always:

  • carry out self-assessments before scheduled performance reviews, or
  • document self-assessments by completing a
    Self-assessment record, or
  • record in your Improvement record problems or opportunities to improve that you identify in self-assessments
  • carry out staff training on identified issues where required.

You regularly assess how well you and your staff meet the Transport Agency’s expectations as set out in the PRS.

This means you:

  • carry out self-assessments at least once a year (or more often as appropriate to the size of your business and the inspection and certification work carried out by your business), and
  • carry out self-assessments before scheduled performance reviews, and
  • document each self-assessment by completing a Self-assessment record, and
  • record in your Improvement record problems or opportunities to improve that you identify in self-assessments
  • carry out staff training on identified issues where required.
5.3
Correct handling of complaints

You and/or most of your staff are not open to complaints and your handling of complaints is inadequate.

This means you:

  • do not have an adequate complaints policy, or
  • do not communicate your complaints policy to your customers, or
  • seldom handle complaints in accordance with Transport Agency requirements, or
  • do not keep records of complaints.

You and/or many of your staff are not open to complaints and your handling of complaints is barely adequate.

This means you:

  • have a complaints policy but that policy is not correctly communicated to your customers because your display does not accurately reflect your policy, or
  • regularly do not handle complaints in accordance with Transport Agency requirements (eg you regularly exceed the time frames set by the Transport Agency for responding to complaints), or
  • regularly fail to record complaints in your Complaints record, or
  • do not record any problems or opportunities to improve that you identify in the investigation of complaints in your Improvement record and follow up on them
  • do not inform the Transport Agency of any incorrect certification outcomes that you have been unable to resolve.

You and most of your staff are open to complaints and your handling of complaints is adequate.

This means you:

  • display your complaints policy to your customers, including information on how to lodge a complaint and your customers’ right to complain to the Transport Agency, and
  • usually handle complaints in accordance with Transport Agency requirements, and
  • keep a Complaints record in which you record most complaints
  • inform the Transport Agency of any incorrect certification outcomes that you have been unable to resolve.

However, you do not always record in your Improvement record, and follow up on, the problems or opportunities to improve that you identify in the investigation of complaints.

You and your staff are open to complaints, handle them correctly, and regard them as opportunities to improve.

This means you:

  • display to your customers your complaints policy, including information on how to lodge a complaint and your customers’ right to complain to the Transport Agency, and
  • handle complaints in accordance with Transport Agency requirements, and
  • keep a Complaints record in which you record all verbal and written complaints, and
  • record in your Improvement record any problems or opportunities to improve that you identify in the investigation of complaints
  • inform the Transport Agency of any incorrect certification outcomes that you have been unable to resolve.
5.4
Commitment to the PRS

You and/or most of your staff show little or no commitment to making the PRS work in and for your business.

This means you do not:

  • use the system for improving your inspection and certification work, or
  • share your problems and achievements with Transport Agency reviewers, or
  • cooperate in Transport Agency reviews.

You and most of your staff show some commitment to making the PRS work in your business but there is little evidence that you actively use it to improve your inspection and certification work.

This means:

  • you make some efforts to use the system in your business, but mostly to satisfy Transport Agency reviewers, and
  • there is a basic level of cooperation in Transport Agency reviews but there is a reluctance to share problems with Transport Agency reviewers.

You and most of your staff show an adequate level of commitment to making the PRS work in and for your business.

This means you:

  • actively use most aspects of the system for improving your inspection and certification work, although you do not use the system to its full extent, and
  • are usually open about your problems and achievements, although some staff are reluctant to share problems with Transport Agency reviewers, and
  • show a good level of cooperation in Transport Agency reviews.

You and your staff are fully committed to making the PRS work in and for your business.

This means you:

  • actively use the system for improving your inspection and certification work, and
  • are open about your problems and achievements, and
  • fully cooperate in Transport Agency reviews.

Technical part

1 Vehicle identification

1-1 Vehicle identification

Requirements

  What the Transport Agency expects of you How the Transport Agency will assess your performance
1.1.1
Correct technical decisions

You thoroughly inspect all evidence of vehicle identification and correctly determine whether it complies with all Transport Agency requirements, taking into account technical information provided by the Transport Agency such as the VIRM: Entry certification.

The Transport Agency will:

  • talk to you
  • observe you at work
  • inspect vehicles which you have certified
  • inspect inspection and certification documents you use and complete
  • inspect information you enter into the Transport Agency computer system.

The Transport Agency may:

  • take into account outcomes from complaints and random re-inspections since your last review.
1.1.2
Technical competence

You are competent in all technical aspects relating to vehicle identification. This means you are competent in:

  • the assessment of vehicle identification
  • the Transport Agency requirements (including VIRM requirements) relating to vehicle identification and the assessment of vehicle identification
  • Transport Agency guidelines relating to vehicle identification
  • the operation of the equipment used for inspecting vehicle identification.

The Transport Agency will:

  • talk to you
  • ask questions to check your competence relating to vehicle identification and the assessment of modifications to vehicle identification
  • observe you at work
  • inspect inspection and certification documents you use and complete
  • inspect your Training record.

The Transport Agency may administer a short test on vehicle identification and the assessment of vehicle identification.

1.1.3
Technical equipment

You have:

  • a hand-held inspection lamp.

The equipment is in good condition and working order.

The Transport Agency will inspect your technical equipment.

Scores

  Score
0
1
2
3
1.1.1
Correct technical decisions

You do not thoroughly inspect all evidence of vehicle identification or correctly determine whether it complies with all Transport Agency requirements.

The area of non-compliance is significant.

For example:

  • a vehicle’s VIN or chassis number is missing, or has obviously been unlawfully affixed or tampered with.

You do not thoroughly inspect all evidence of vehicle identification or correctly determine whether it complies with all Transport Agency requirements.

The area of non-compliance is somewhat important.

For example:

  • a vehicle’s VIN or chassis number is damaged or obscured beyond recognition
  • the VIN or chassis number does not match the paper work supplied
  • you assign a New Zealand VIN to a vehicle with a factory VIN.

You do not thoroughly inspect all evidence of vehicle identification or correctly determine whether it complies with all Transport Agency requirements.

The area of non-compliance is minor.

For example:

  • a vehicle’s VIN or chassis number is damaged or obscured but still readable
  • you record the VIN or chassis number off the manufacturer’s plate but fail to confirm the VIN or chassis number matches the number stamped into the separate chassis
  • you take take the vehicle’s attributes from the paper work rather than from the vehicle.

You thoroughly inspect all evidence of vehicle identification and correctly determine whether it complies with all Transport Agency requirements.

For example:

  • you correctly assign and attach a VIN plate to the vehicle.
1.1.2
Technical competence

You demonstrate:

  • little or no competence in the technical aspects relating to vehicle identification or VIN assignment.

This means there are significant gaps in your knowledge of, or skills in:

  • the assessment of vehicle identification and or VIN assignment
  • the Transport Agency requirements (including VIRM requirements) relating to vehicle identification
  • Transport Agency guidelines relating to vehicle identification
  • the operation of the equipment you use for assessing vehicle identification.

You demonstrate:

  • some competence in the technical aspects relating to vehicle identification and VIN assignment

This means there are some gaps in your knowledge of, or skills in:

  • the assessment of vehicle identification and the VIN assignment processor
  • the Transport Agency requirements (including VIRM requirements) relating to vehicle identification
  • Transport Agency guidelines relating to vehicle identification
  • the operation of the equipment you use for assessing vehicle identification or assigning a VIN.

You demonstrate:

  • adequate competence in the technical aspects relating to vehicle identification and VIN assignment.

This means there are minor gaps in your knowledge of, or skills in:

  • the assessment of vehicle identification
  • the Transport Agency requirements (including VIRM requirements) relating to vehicle identification
  • Transport Agency guidelines relating to vehicle identification, or the VIN assignment process
  • the operation of the equipment you use for assessing vehicle identification or assigning a VIN.

You can demonstrate comprehensive competence in the technical aspects relating to vehicle identification and VIN assignment including their compliance with Land Transport Rules.

This means you can demonstrate comprehensive knowledge of, and skills in:

  • the assessment of vehicle identification
  • the Transport Agency requirements (including VIRM requirements) relating to vehicle identification and the VIN assignment process
  • Transport Agency guidelines relating to vehicle identification
  • the operation of the equipment you use for inspecting vehicle identification.
1.1.3
Technical equipment

Not all of the specified equipment is available (eg there is no VIN embossing machine on site). Where equipment is available, some or all of it is not in working order.

All specified equipment is available but not in working order.

All specified equipment is available, in working order and in at least adequate condition

All specified equipment is available and in good condition and working order.

2 Vehicle exterior

2-1 External projections

Requirements

  What the Transport Agency expects of you How the Transport Agency will assess your performance
2.1.1
Correct technical decisions

You thoroughly inspect all documents or vehicles and correctly determine that they comply with all Transport Agency requirements, taking into account technical information provided by the Transport Agency such as the VIRM: Entry certification and the VIRM: In-service certification.

The Transport Agency will:

  • talk to you
  • observe you at work
  • inspect the external projections of vehicles which you have certified
  • inspect inspection and certification documents you use and complete
  • inspect information that staff enter into the Transport Agency’s computer system.
2.1.2
Technical competence

You are competent in all technical aspects relating to external projections, including their compliance with approved vehicle standards. This means you are competent in:

  • the assessment of external projections
  • legal requirements (including Transport Agency requirements) relating to external projections and the assessment of external projections
  • Transport Agency guidelines relating to external projections
  • the operation of the equipment you use for assessing external projections.

The Transport Agency will:

  • talk to you
  • ask questions to check your competence relating to external projections and the assessment of external projections
  • observe you at work
  • inspect the vehicles and components which you have certified
  • inspect your Training record.

The Transport Agency may administer a short test on external projections and the assessment of external projections.

2.1.3
Technical equipment

You have:

  • a tape measure.

The equipment is in good condition and working order.

The Transport Agency will inspect your technical equipment.

Scores

  Score
0
1
2
3
2.1.1
Correct technical decisions

You do not thoroughly inspect all components or correctly determine whether the external projections comply with all legal requirements, including approved vehicle standards.

The area of non-compliance is likely to compromise the safety of vehicle occupants or other road users.

For example:

  • a protruding object or fitting is not securely attached and is likely to fall off the vehicle
  • an ornamental object or fitting protrudes in such a way that it is likely to injure a person or significantly affect the driver’s vision or control
  • a component of a motor vehicle, including a body panel, is damaged, corroded or exposed such that it is likely to hook a vehicle, or hook or graze a person.

You do not thoroughly inspect all components or correctly determine whether the external projections comply with all legal requirements, including approved vehicle standards.

The area of non-compliance may compromise the safety of vehicle occupants or other road users.

For example:

  • a component of a motor vehicle, including a body panel, is damaged, corroded or exposed such that it may hook a vehicle, or hook or graze a person
  • a vehicle that is required to comply with an approved external projections standard did not comply, or cannot be demonstrated to have complied, with an approved standard at the time the vehicle was manufactured.

You do not thoroughly inspect all components or correctly determine whether the external projections comply with all legal requirements, including approved vehicle standards.

The area of non-compliance is unlikely to compromise the safety of vehicle occupants or other road users.

For example:

  • a protruding object or fitting that has a functional purpose has an unnecessarily wide gap between the object or fitting and the vehicle.

You thoroughly inspect all components and correctly determine whether the external projections comply with all legal requirements, including approved vehicle standards.

2.1.2
Technical competence

You demonstrate:

  • little or no competence in the technical aspects relating to external projections, including their compliance with approved vehicle standards, or
  • a level of competence that is likely to compromise the safety of vehicle occupants or other road users.

This means there are significant gaps in your knowledge of, or skills in:

  • the assessment of external projections
  • the legal requirements (including Transport Agency requirements) relating to external projections
  • Transport Agency guidelines relating to external projections
  • the operation of the equipment you use for assessing external projections.

You demonstrate:

  • some competence in the technical aspects relating to external projections, including their compliance with approved vehicle standards, or
  • a level of competence that may compromise the safety of vehicle occupants or other road users.

This means there are some gaps in your knowledge of, or skills in:

  • the assessment of external projections
  • the legal requirements (including Transport Agency requirements) relating to external projections
  • Transport Agency guidelines relating to external projections
  • the operation of the equipment you use for assessing external projections.

You demonstrate:

  • adequate competence in the technical aspects relating to external projections, including their compliance with approved vehicle standards, or
  • a level of competence that is unlikely to compromise the safety of vehicle occupants or other road users.

This means there are minor gaps in your knowledge of, or skills in:

  • the assessment of external projections
  • the legal requirements (including Transport Agency requirements) relating to external projections
  • Transport Agency guidelines relating to external projections
  • the operation of the equipment you use for assessing external projections.

You can demonstrate comprehensive competence in the technical aspects relating to external projections, including their compliance with approved vehicle standards.

This means you can demonstrate comprehensive knowledge of, or skills in:

  • the assessment of external projections
  • the legal requirements (including Transport Agency requirements) relating to external projections
  • Transport Agency guidelines relating to external projections
  • the operation of the equipment you use for assessing external projections.
2.1.3
Technical equipment

Not applicable.

Not applicable.

Not applicable.

Not applicable.

3 Vehicle structure

3-1 Vehicle structure

Requirements

  What the Transport Agency expects of you How the Transport Agency will assess your performance
3.1.1
Correct technical decisions

You thoroughly inspect all components and correctly determine whether the vehicle structure complies with all Transport Agency requirements, taking into account technical information provided by the Transport Agency such as the VIRM: Entry certification.

The Transport Agency will:

  • talk to you
  • observe you at work
  • inspect vehicles which you have certified
  • inspect inspection and certification documents you use and complete
  • inspect information you enter into the Transport Agency computer system.

The Transport Agency may:

  • take into account outcomes from complaints and random re-inspections since your last review.
3.1.2
Technical competence

You are competent in all technical aspects relating to vehicle structures. This means you are competent in:

  • the assessment of vehicle structures
  • Transport Agency requirements (including VIRM requirements) relating to vehicle dimensions and the assessment of vehicle dimensions
  • Transport Agency guidelines relating to vehicle structures
  • the operation of the equipment used for inspecting vehicle structures.

The Transport Agency will:

  • talk to you
  • ask questions to check your competence relating to vehicle structures and the assessment of vehicle structures
  • observe you at work
  • inspect inspection and certification documents you use and complete
  • inspect your Training record.

The Transport Agency may administer a short test on vehicle dimensions and the assessment of vehicle dimensions.

3.1.3
Technical equipment

You have:

  • a hand-held inspection lamp, and
  • a tape measure.

The equipment is in good condition and working order.

The Transport Agency will inspect your technical equipment.

Scores

  Score
0
1
2
3
3.1.1
Correct technical decisions

You do not thoroughly inspect all components or correctly determine whether the vehicle structure complies with all legal requirements, including approved vehicle standards.

The area of non-compliance is likely to compromise the safety of vehicle occupants or other road users.

For example:

  • the vehicle structure has been damaged beyond the threshold specified by the Transport Agency and has not been referred to a specialist repair certifier for repair certification. The damage is likely to compromise the safety of vehicle occupants or other road users.

You do not thoroughly inspect all components or correctly determine whether the vehicle structure complies with all legal requirements, including approved vehicle standards.

The area of non-compliance may compromise the safety of vehicle occupants or other road users.

For example:

  • a vehicle that is required to comply with an approved frontal impact standard did not comply, or cannot be demonstrated to have complied, with an approved standard at the time the vehicle was manufactured
  • the vehicle structure has been previously repaired beyond the threshold specified by the Transport Agency and has not been referred to a specialist repair certifier for repair certification. The repair may compromise the safety of vehicle occupants or other road users.

You do not thoroughly inspect all components or correctly determine whether the vehicle structure complies with all legal requirements, including approved vehicle standards.

The area of non-compliance is unlikely to compromise the safety of vehicle occupants or other road users.

For example:

  • you do not use an inspection lamp
  • the level of trim removal does not meet the minimum required by Transport Agency.

You thoroughly inspect all components and correctly determine whether the vehicle structure complies with all legal requirements, including approved vehicle standards.

3.1.2
Technical competence

You demonstrate:

  • little or no competence in the technical aspects relating to vehicle structures, including their compliance with approved vehicle standards, or
  • a level of competence that is likely to compromise the safety of vehicle occupants or other road users.

This means there are significant gaps in your knowledge of, or skills in:

  • the assessment of vehicle structures
  • the legal requirements (including Transport Agency requirements) relating to vehicle structures
  • the Transport Agency repair threshold relating to vehicle structures
  • the operation of the equipment you use for assessing vehicle structures.

You demonstrate:

  • some competence in the technical aspects relating to vehicle structures, including their compliance with approved vehicle standards, or
  • a level of competence that may compromise the safety of vehicle occupants or other road users.

This means there are some gaps in your knowledge of, or skills in:

  • the assessment of vehicle structures
  • the legal requirements (including Transport Agency requirements) relating to vehicle structures
  • the Transport Agency repair threshold relating to vehicle structures
  • the operation of the equipment you use for assessing vehicle structures.

You demonstrate:

  • adequate competence in the technical aspects relating to vehicle structures, including their compliance with approved vehicle standards, or
  • a level of competence that is unlikely to compromise the safety of vehicle occupants or other road users.

This means there are minor gaps in your knowledge of, or skills in:

  • the assessment of vehicle structures
  • the legal requirements (including Transport Agency requirements) relating to vehicle structures
  • the Transport Agency repair threshold relating to vehicle structures
  • the operation of the equipment you use for assessing vehicle structures.

You can demonstrate comprehensive competence in the technical aspects relating to vehicle structures, including their compliance with approved vehicle standards.

This means you can demonstrate comprehensive knowledge of, or skills in:

  • the assessment of vehicle structures, and
  • the legal requirements (including Transport Agency requirements) relating to vehicle structures, and
  • the Transport Agency repair threshold relating to vehicle structures, and
  • the operation of the equipment you use for assessing vehicle structures.
3.1.3
Technical equipment

Not all of the specified equipment is available. Where equipment is available, some or all of it is not in working order.

All specified equipment is available and in working order, but some or all of it is in poor condition.

All specified equipment is available, in working order, and in at least adequate condition.

All specified equipment is available and in good condition and working order.

4 Lighting

4-1 Vehicle lighting equipment

Requirements

  What the Transport Agency expects of you How the Transport Agency will assess your performance
4.1.1
Correct technical decisions

You thoroughly inspect all components and correctly determine whether the vehicle structure complies with all Transport Agency requirements, taking into account all technical information including that provided by the Transport Agency such as the VIRM: Entry certification.

The Transport Agency will:

  • talk to you
  • observe you at work
  • inspect vehicles which you have certified
  • inspect inspection and certification documents you use and complete
  • inspect information you enter into the Transport Agency computer system.

The Transport Agency may:

  • take into account outcomes from complaints and random re-inspections since your last review.
4.1.2
Technical competence

You are competent in all technical aspects relating to vehicle structures. This means you are competent in:

  • the assessment of vehicle lighting
  • Transport Agency requirements (including VIRM requirements) relating to vehicle lighting and the assessment of vehicle lighting
  • Transport Agency guidelines relating to vehicle lighting
  • the operation of the equipment used for inspecting vehicle lighting.

The Transport Agency will:

  • talk to you
  • ask questions to check your competence relating to vehicle lighting and the assessment of vehicle lighting
  • observe you at work
  • inspect inspection and certification documents you use and complete
  • inspect your Training record.

The Transport Agency may administer a short test on vehicle lighting and the assessment of vehicle lighting.

4.1.3
Technical equipment

You have:

  • a tape measure.
  • a beamsetter for commercial use, and/or
  • a lightboard.

The equipment is in good condition and working order.

The Transport Agency will inspect your technical equipment.

Scores

  Score
0
1
2
3
4.1.1
Correct technical decisions

You do not thoroughly inspect all vehicle lighting equipment or correctly determine whether it complies with all Transport Agency requirements, including approved vehicle standards

The area of non-compliance is likely to compromise the safety of vehicle occupants or other road users.

For example:

  • the aim of a head lamp dipped beam is too high
  • a vehicle’s head lamps’ pattern dips towards the centre line
  • a class MA vehicle has not been fitted with a high-mounted stop lamp.

You do not thoroughly inspect all vehicle lighting equipment or correctly determine whether it complies with all Transport Agency requirements, including approved vehicle standards

The area of non-compliance may compromise the safety of vehicle occupants or other road users.

For example:

  • a lamp that is required to comply with an approved standard does not comply or cannot be demonstrated to comply with an approved standard
  • a lamp, other than a reversing lamp or registration plate lamp, emits a white light, eg due to damage or significant fading of the lens.

You do not thoroughly inspect all vehicle lighting equipment or correctly determine whether it complies with all Transport Agency requirements, including approved vehicle standards.

The area of non-compliance is unlikely to compromise the safety of vehicle occupants or other road users.

For example:

  • a lens is damaged in a way that allows dirt or moisture to enter, but the optical properties of the lamp have not yet been affected
  • the light output of a pair of headlamps is not approximately equal
  • the aim of a low beam head lamp is too low
  • when switched on, a fog lamp does not operate.

You thoroughly inspect all vehicle lighting equipment and correctly determine whether it complies with all Transport Agency requirements, including approved vehicle standards.

4.1.2
Technical competence

You demonstrate:

  • little or no competence in the technical aspects relating to all vehicle lighting equipment, including their compliance with approved vehicle standards
  • a level of competence that is likely to compromise the safety of vehicle occupants or other road users.

This means there are significant gaps in your knowledge of, or skills in:

  • the assessment of vehicle lighting equipment
  • Transport Agency requirements (including VIRM requirements) relating to vehicle lighting equipment and the assessment of vehicle lighting equipment
  • Transport Agency guidelines relating to vehicle lighting equipment
  • the operation of the equipment you use for assessing vehicle lighting equipment.

You demonstrate:

  • some competence in the technical aspects relating to all vehicle lighting equipment, including their compliance with approved vehicle standards
  • a level of competence that may compromise the safety of vehicle occupants or other road users.

This means there are some gaps in your knowledge of, or skills in:

  • the assessment of vehicle lighting equipment
  • Transport Agency requirements (including VIRM requirements) relating to vehicle lighting equipment and the assessment of vehicle lighting equipment
  • Transport Agency guidelines relating to vehicle lighting equipment
  • the operation of the equipment you use for assessing vehicle lighting equipment.

You demonstrate:

  • adequate competence in the technical aspects relating to all vehicle lighting equipment, including their compliance with approved vehicle standards
  • a level of competence that is unlikely to compromise the safety of vehicle occupants or other road users.

This means there are minor gaps in your knowledge of, or skills in:

  • the assessment of vehicle lighting equipment
  • Transport Agency requirements (including VIRM requirements) relating to vehicle lighting equipment and the assessment of vehicle lighting equipment
  • Transport Agency guidelines relating to vehicle lighting equipment
  • the operation of the equipment you use for assessing vehicle lighting equipment.

You can demonstrate comprehensive competence in the technical aspects relating to all vehicle lighting equipment, including their compliance with approved vehicle standards.

This means you can demonstrate comprehensive knowledge of, and skills in:

  • the assessment of vehicle lighting equipment
  • Transport Agency requirements (including VIRM requirements) relating to vehicle lighting equipment and the assessment of vehicle lighting equipment
  • Transport Agency guidelines relating to vehicle lighting equipment
  • the operation of the equipment you use for assessing vehicle lighting equipment.
4.1.3
Technical equipment

Not all of the specified equipment is available. Where equipment is available, some or all of it is not in working order.

All specified equipment is available and in working order, but some or all of it is in poor condition.

All specified equipment is available, in working order, and in at least adequate condition.

All specified equipment is available and in good condition and working order.

5 Vision

5-1 Glazing, sun visors, windscreen wipe and wash, and rear-view mirrors

Requirements

  What the Transport Agency expects of you How the Transport Agency will assess your performance
5.1.1
Correct technical decisions

You thoroughly inspect all components and correctly determine whether the glazing, sun visors, wipe and wash, and rear-view mirrors comply with all Transport Agency requirements, taking into account all technical information including that provided by the Transport Agency such as the VIRM: Entry certification.

The Transport Agency will:

  • talk to you
  • observe you at work
  • inspect vehicles which you have certified
  • inspect inspection and certification documents you use and complete
  • inspect information you enter into the Transport Agency computer system.

The Transport Agency may:

  • take into account outcomes from complaints and random re-inspections since your last review.
5.1.2
Technical competence

You are competent in all technical aspects relating to glazing, sun visors, wipe and wash, and rear-view mirrors.

This means you are competent in:

  • the assessment of glazing, sun visors, wipe and wash, and rear-view mirrors
  • Transport Agency requirements (including VIRM requirements) relating to glazing, sun visors, wipe and wash, and rear-view mirrors and their assessment
  • Transport Agency guidelines relating to glazing, sun visors, wipe and wash, and rear-view mirrors
  • the operation of the equipment you use for assessing glazing, sun visors, wipe and wash, and rear-view mirrors.

The Transport Agency will:

  • talk to you
  • ask questions to check your competence relating to glazing, sun visors, wipe and wash, and rear-view mirrors and the assessment of glazing, sun visors, wipe and wash, and rear-view mirrors
  • observe you at work
  • inspect inspection and certification documents you use and complete
  • inspect your Training record.

The Transport Agency may administer a short test on glazing, sun visors, wipe and wash, and rear-view mirrors and their assessment.

5.1.3
Technical equipment

You have:

  • a tape measure or other means of assessing the extent of windscreen damage, and
  • a 35% VLT tint sample or a light transmission meter.

The equipment is in good condition and working order.

The Transport Agency will inspect your technical equipment.

Scores

  Score
0
1
2
3
5.1.1
Correct technical decisions

You do not thoroughly inspect all glazing, sun visors, wipe and wash, and rear-view mirrors and correctly determine whether they comply with all Transport Agency requirements, including approved vehicle standards.

The area of non-compliance is likely to compromise the safety of vehicle occupants or other road users.

For example:

  • glazing has damage or defects to the extent that its strength or the driver’s vision is compromised
  • a windscreen or front side window has been modified to the extent that it impairs the driver’s vision
  • a rear or rear side window has large areas of stickers, very dark tint or opaque overlays applied, and the vehicle does not have an external rear-view mirror on each side of the vehicle
  • an inside or external right-hand side rear-view mirror is not fitted or does not provide a clear view to the rear of the vehicle
  • a driver’s-side windscreen wiper is not fitted or working.

You do not thoroughly inspect all glazing, sun visors, wipe and wash, and rear-view mirrors or correctly determine whether they comply with all Transport Agency requirements, including approved vehicle standards.

The area of non-compliance may compromise the safety of vehicle occupants or other road users.

For example:

  • glazing that is required to comply with an approved glazing standard or trade name did not comply, or cannot be demonstrated to have complied, with an approved standard or trade name at the time the vehicle was manufactured or the glazing fitted.
  • a vehicle has modified glazing that is not permitted, but vision is not impaired
  • the windscreen wash system does not operate
  • a rear-view mirror cannot be adjusted.

You do not thoroughly inspect all glazing, sun visors, wipe and wash, and rear-view mirrors or correctly determine whether they comply with all Transport Agency requirements, including approved vehicle standards.

The area of non-compliance is unlikely to compromise the safety of vehicle occupants or other road users.

For example:

  • smaller stickers are fitted to a rear side window on the driver’s side outside the area where stickers are permitted
  • a rear-view mirror that is required to comply with an approved rear-view mirror standard did not comply, or cannot be demonstrated to have complied, with an approved standard at the time the vehicle was manufactured or the rear-view mirror fitted.

You thoroughly inspect all glazing, sun visors, wipe and wash, and rear-view mirrors and correctly determine whether they comply with all Transport Agency requirements, including approved vehicle standards.

5.1.2
Technical competence

You demonstrate:

  • little or no competence in the technical aspects relating to glazing, sun visors, wipe and wash, and rear-view mirrors, including their compliance with approved vehicle standards, or
  • a level of competence that is likely to compromise the safety of vehicle occupants or other road users.

This means there are significant gaps in your knowledge of, or skills in:

  • the assessment of glazing, sun visors, wipe and wash, and rear-view mirrors
  • Transport Agency requirements and guidelines (including VIRM requirements) relating to glazing, sun visors, wipe and wash, and rear-view mirrors
  • the operation of the equipment you use for assessing glazing, sun visors, wipe and wash, and rear-view mirrors.

You demonstrate:

  • some competence in the technical aspects relating to glazing, sun visors, wipe and wash, and rear-view mirrors, including their compliance with approved vehicle standards, or
  • a level of competence that may compromise the safety of vehicle occupants or other road users.

This means there are some gaps in your knowledge of, or skills in:

  • the assessment of glazing, sun visors, wipe and wash, and rear-view mirrors
  • Transport Agency requirements and guidelines (including VIRM requirements) relating to glazing, sun visors, wipe and wash, and rear-view mirrors
  • the operation of the equipment you use for assessing glazing, sun visors, wipe and wash, and rear-view mirrors.

You demonstrate:

  • adequate competence in the technical aspects relating to glazing, sun visors, wipe and wash, and rear-view mirrors, including their compliance with approved vehicle standards, or
  • a level of competence that is unlikely to compromise the safety of vehicle occupants or other road users.

This means there are minor gaps in your knowledge of, or skills in:

  • the assessment of glazing, sun visors, wipe and wash, and rear-view mirrors
  • Transport Agency requirements and guidelines (including VIRM requirements) relating to glazing, sun visors, wipe and wash, and rear-view mirrors
  • the operation of the equipment you use for assessing glazing, sun visors, wipe and wash, and rear-view mirrors.

You can demonstrate comprehensive competence in the technical aspects relating to glazing, sun visors, wipe and wash, and rear-view mirrors, including their compliance with approved vehicle standards,

This means you can demonstrate comprehensive knowledge of, and skills in:

  • the assessment of glazing, sun visors, wipe and wash, and rear-view mirrors
  • Transport Agency requirements (including VIRM requirements) relating to glazing, sun visors, wipe and wash, and rear-view mirrors
  • Transport Agency guidelines relating to glazing, sun visors, wipe and wash, and rear-view mirrors
  • the operation of the equipment you use for assessing glazing, sun visors, wipe and wash, and rear-view mirrors.
5.1.3
Technical equipment

Not all of the specified equipment is available. Where equipment is available, some or all of it is not in working order.

All specified equipment is available and in working order, but some or all of it is in poor condition.

All specified equipment is available, in working order and in at least adequate condition.

All specified equipment is available and in good condition and working order.

6 Entrance and exit

6-1 Door and hinged panel retention systems

Requirements

  What the Transport Agency expects of you How the Transport Agency will assess your performance
6.1.1
Correct technical decisions

You thoroughly inspect all door and hinged panel retention systems and correctly determine whether they comply with all Transport Agency requirements, taking into account all technical information including that provided by the Transport Agency such as the VIRM: Entry certification.

The Transport Agency will:

  • talk to you
  • observe you at work
  • inspect vehicles which you have certified
  • inspect inspection and certification documents you use and complete
  • inspect information you enter into the Transport Agency computer system.

The Transport Agency may:

  • take into account outcomes from complaints and random re-inspections since your last review.
6.1.2
Technical competence

You are competent in all technical aspects relating to door and hinged panel retention systems.

This means you are competent in:

  • the assessment of door and hinged panel retention systems
  • Transport Agency requirements (including VIRM requirements) relating to door and hinged panel retention systems and the assessment of door and hinged panel retention systems
  • Transport Agency guidelines relating to door and hinged panel retention systems
  • the operation of the equipment you use for assessing door and hinged panel retention systems.

The Transport Agency will:

  • talk to you
  • ask questions to check your competence relating to door and hinged panel retention systems and the assessment of door and hinged panel retention systems
  • observe you at work
  • inspect inspection and certification documents you use and complete
  • inspect your Training record.

The Transport Agency may administer a short test on door and hinged panel retention systems.

6.1.3
Technical equipment

You have:

  • a hand-held inspection lamp, and
  • a tape measure.

The equipment is in good condition and working order.

The Transport Agency will inspect your technical equipment.

Scores

  Score
0
1
2
3
6.1.1
Correct technical decisions

You do not thoroughly inspect all door and hinged panel retention systems and correctly determine whether they comply with all Transport Agency requirements, including approved vehicle standards.

The area of non-compliance is likely to compromise the safety of vehicle occupants or other road users.

For example:

  • a door or hinged panel is not securely attached to the vehicle and is at immediate risk of falling off
  • a door used for entrance and exit cannot be opened
  • a door cannot be opened from the inside (unless an original child lock is activated)
  • a door or hinged panel does not lock securely or does not remain locked securely in service.

You do not thoroughly inspect all door and hinged panel retention systems and correctly determine whether they comply with all Transport Agency requirements, including approved vehicle standards.

The area of non-compliance may compromise the safety of vehicle occupants or other road users.

For example:

  • a door or hinged panel is insecurely attached, but not at immediate risk of falling off
  • a door used for entrance and exit requires considerable force to open
  • a vehicle that is required to comply with an approved door retention system standard did not comply, or cannot be demonstrated to have complied, with an approved standard at the time the vehicle was manufactured.

You do not thoroughly inspect all door and hinged panel retention systems and correctly determine whether they comply with all Transport Agency requirements, including approved vehicle standards.

The area of non-compliance is unlikely to compromise the safety of vehicle occupants or other road users.

For example:

  • a door shows minor wear in its hinge pins, indicated by a slight lowering of the door on opening.

You thoroughly inspect all door and hinged panel retention systems and correctly determine whether they comply with all Transport Agency requirements, including approved vehicle standards.

6.1.2
Technical competence

You demonstrate:

  • little or no competence in the technical aspects relating to door and hinged panel retention systems,including their compliance with approved vehicle standards, or
  • a level of competence that is likely to compromise the safety of vehicle occupants or other road users.

This means there are significant gaps in your knowledge of, or skills in:

  • the assessment of door and hinged panel retention systems
  • Transport Agency requirements (including VIRM requirements) relating to door and hinged panel retention systems
  • Transport Agency guidelines relating to door and hinged panel retention systems
  • the operation of the equipment you use for assessing door and hinged panel retention systems.

You demonstrate:

  • little or no competence in the technical aspects relating to door and hinged panel retention systems,including their compliance with approved vehicle standards, or
  • a level of competence that is likely to compromise the safety of vehicle occupants or other road users.

This means there are some gaps in your knowledge of, or skills in:

  • the assessment of door and hinged panel retention systems
  • Transport Agency requirements (including VIRM requirements) relating to door and hinged panel retention systems
  • Transport Agency guidelines relating to door and hinged panel retention systems
  • the operation of the equipment you use for assessing door and hinged panel retention systems.

You demonstrate:

  • some competence in the technical aspects relating to door and hinged panel retention systems, including their compliance with approved vehicle standards, or
  • a level of competence that may compromise the safety of vehicle occupants or other road users.

This means there are minor gaps in your knowledge of, or skills in:

  • the assessment of door and hinged panel retention systems
  • Transport Agency requirements (including VIRM requirements) relating to door and hinged panel retention systems
  • Transport Agency guidelines relating to door and hinged panel retention systems
  • the operation of the equipment you use for assessing door and hinged panel retention systems.

You can demonstrate comprehensive competence in the technical aspects relating to door and hinged panel retention systems, including their compliance with approved vehicle standards.

This means you can demonstrate comprehensive knowledge of, and skills in:

  • the assessment of door and hinged panel retention systems
  • Transport Agency requirements (including VIRM requirements) relating to door and hinged panel retention systems
  • Transport Agency guidelines relating to door and hinged panel retention systems
  • the operation of the equipment you use for assessing door and hinged panel retention systems.
6.1.3
Technical equipment

Not all of the specified equipment is available. Where equipment is available, some or all of it is not in working order.

All specified equipment is available and in working order, but some or all of it is in poor condition.

All specified equipment is available, in working order and in at least adequate condition.

All specified equipment is available and in good condition and working order.

7 Vehicle interior

7-1 Seats, seat anchorages, head restraints, seatbelts, seatbelt anchorages, front airbags, interior impact measures, speedometers and audible warning devices

Requirements

  What the Transport Agency expects of you How the Transport Agency will assess your performance
7.1.1
Correct technical decisions

You thoroughly inspect all vehicle interior components and correctly determine whether they comply with all Transport Agency requirements for seats, seat anchorages, head restraints, seatbelts, seatbelt anchorages, front airbags, interior impact measures, speedometers and audible warning devices, taking into account technical information provided by the Transport Agency such as the VIRM: Entry certification.

The Transport Agency will:

  • talk to you
  • observe you at work
  • inspect vehicles which you have certified
  • inspect inspection and certification documents you use and complete
  • inspect information you enter into the Transport Agency computer system.

The Transport Agency may:

  • take into account outcomes from complaints and random re-inspections since your last review.
7.1.2
Technical competence

You are competent in all technical aspects relating to seats, seat anchorages, head restraints, seatbelts, seatbelt anchorages, front airbags, interior impact measures, speedometers and audible warning devices.

This means you are competent in:

  • the assessment of all vehicle interior components
  • Transport Agency requirements (including VIRM requirements) relating to interior components and the assessment of interior components
  • Transport Agency guidelines relating to vehicle interior components
  • the operation of the equipment you use for assessing vehicle interior components.

The Transport Agency will:

  • talk to you
  • ask questions to check your competence relating to seats, head restraints, seatbelts, seatbelt anchorages, front airbags, interior impact measures, speedometers and audible warning devices
  • observe you at work
  • inspect inspection and certification documents you use and complete
  • inspect your Training record.

The Transport Agency may administer a short test on vehicle interior components.

7.1.3
Technical equipment

You have:

  • a hand-held inspection lamp, and
  • a tape measure.

The equipment is in good condition and working order.

The Transport Agency will inspect your technical equipment.

Scores

  Score
0
1
2
3
7.1.1
Correct technical decisions

You do not thoroughly inspect all seats, seat anchorages, head restraints, seatbelts, seatbelt anchorages, front airbags, interior impact measures, speedometers and audible warning devices and correctly determine whether they comply with all Transport Agency requirements.

The area of non-compliance is likely to compromise the safety of vehicle occupants or other road users.

For example:

  • the driver’s seat is insecure or does not adjust, a seat belt has damaged or frayed webbing, a front head restraint is missing
  • an airbag has been removed from the vehicle.

You do not thoroughly inspect all seats, seat anchorages, head restraints, seatbelts, seatbelt anchorages, front airbags, interior impact measures, speedometers and audible warning devices and correctly determine whether they comply with all Transport Agency requirements.

The area of non-compliance may compromise the safety of vehicle occupants or other road users.

For example:

  • a seat or seat anchorage, seatbelt or seatbelt anchorage that is required to comply with an approved standard did not comply, or cannot be demonstrated to have complied, with an approved standard at the time the vehicle was manufactured
  • a head restraint that is required to comply with an approved standard did not comply, or cannot be demonstrated to have complied, with an approved standard at the time the vehicle was manufactured or the head restraint fitted
  • a vehicle that is required to comply with an approved interior impact standard did not comply, or cannot be demonstrated to have complied, with an approved standard at the time the vehicle was manufactured
  • an airbag warning lamp does not function or remains activated, indicating a fault.

You do not thoroughly inspect all seats, seat anchorages, head restraints, seatbelts , seatbelt anchorages, front airbags, interior impact measures, speedometers and audible warning devices and correctly determine whether they comply with all Transport Agency requirements.

The area of non-compliance is unlikely to compromise the safety of vehicle occupants or other road users.

For example:

  • a horn is not audible from 100m
  • a front head restraint, although fitted, cannot be adjusted
  • a lap belt can not be adjusted
  • a speedometer flickers or does not read accurately.

You thoroughly inspect all seats, seat anchorages, head restraints, seatbelts, seatbelt anchorages, front airbags, interior impact measures, speedometers and audible warning devices and correctly determine whether they comply with all Transport Agency requirements, including approved vehicle standards.

7.1.2
Technical competence

You demonstrate:

  • little or no competence in the technical aspects relating to vehicle interior components,including their compliance with approved vehicle standards, or
  • a level of competence that is likely to compromise the safety of vehicle occupants or other road users.

This means there are significant gaps in your knowledge of, or skills in:

  • the assessment of vehicle interior components
  • Transport Agency requirements (including VIRM requirements) relating to vehicle interior components
  • Transport Agency guidelines relating to vehicle interior components
  • the operation of the equipment you use for assessing vehicle interior components.

You demonstrate:

  • some competence in the technical aspects relating to vehicle interior components, including their compliance with approved vehicle standards, or
  • a level of competence that may compromise the safety of vehicle occupants or other road users.

This means there are some gaps in your knowledge of, or skills in:

  • the assessment of vehicle interior components
  • Transport Agency requirements (including VIRM requirements) relating to vehicle interior components
  • Transport Agency guidelines relating to vehicle interior components
  • the operation of the equipment you use for assessing vehicle interior components.

You demonstrate:

  • adequate competence in the technical aspects relating to vehicle interior components,including their compliance with approved vehicle standards, or
  • a level of competence that is unlikely to compromise the safety of vehicle occupants or other road users.

This means there are minor gaps in your knowledge of, or skills in:

  • the assessment of vehicle interior components
  • Transport Agency requirements (including VIRM requirements) relating to vehicle interior components
  • Transport Agency guidelines relating to vehicle interior components
  • the operation of the equipment you use for assessing vehicle interior components.

You can demonstrate comprehensive competence in the technical aspects relating to vehicle interior components, including their compliance with approved vehicle standards,.

This means you can demonstrate comprehensive knowledge of, and skills in:

  • the assessment of vehicle interior components
  • Transport Agency requirements (including VIRM requirements) relating to vehicle interior components
  • Transport Agency guidelines relating to vehicle interior components
  • the operation of the equipment you use for assessing vehicle interior components.
7.1.3
Technical equipment

Not all of the specified equipment is available. Where equipment is available, some or all of it is not in working order.

All specified equipment is available and in working order, but some or all of it is in poor condition.

All specified equipment is available, in working order and in at least adequate condition.

All specified equipment is available and in good condition and working order.

8 Brakes

8-1 Vehicle brakes

Requirements

  What the Transport Agency expects of you How the Transport Agency will assess your performance
8.1.1
Correct technical decisions

You thoroughly inspect all components and correctly determine whether the vehicle brakes comply with all Transport Agency requirements, taking into account technical information provided by the Transport Agency such as the VIRM: Entry certification.

The Transport Agency will:

  • talk to you
  • observe you at work
  • inspect vehicles which you have certified
  • inspect inspection and certification documents you use and complete
  • inspect information you enter into the Transport Agency computer system.

The Transport Agency may:

  • take into account outcomes from complaints, random re-inspections and ‘mystery shopper’ exercises since your last review.
8.1.2
Technical competence

You are competent in all technical aspects relating to vehicle brakes.

This means you are competent in:

  • the assessment of vehicle brakes
  • Transport Agency requirements (including VIRM requirements) relating to vehicle brakes and the assessment of vehicle brakes
  • Transport Agency guidelines relating to vehicle brakes
  • the operation of the equipment you use for assessing vehicle brakes.

The Transport Agency will:

  • talk to you
  • ask questions to check your competence relating to vehicle brakes and the assessment of service brakes and park brakes
  • observe you at work
  • inspect inspection and certification documents you use and complete
  • inspect your Training record.

The Transport Agency may administer a short test on vehicle brakes.

8.1.3
Technical equipment

You have:

  • an Transport Agency-approved brake testing device, and
  • a hand-held inspection lamp.

The equipment is in good condition and working order.

The Transport Agency will inspect your technical equipment.

Scores

  Score
0
1
2
3
8.1.1
Correct technical decisions

You do not thoroughly inspect all components or correctly determine whether the service brakes and park brakes comply with all legal requirements, including approved vehicle standards.

The area of non-compliance is likely to compromise the safety of vehicle occupants or other road users.

For example:

  • a brake that is required to comply with an approved brake standard did not comply, or cannot be demonstrated to have complied, with an approved standard at the time the vehicle was manufactured
  • a brake drum or a brake disc is fractured or otherwise damaged, seriously compromising the ability to safely brake the vehicle
  • brake friction material is separated from the brake pad backing pad or brake shoe, or is contaminated, cracked or otherwise damaged.

You do not thoroughly inspect all components or correctly determine whether the service brakes and park brakes comply with all legal requirements, including approved vehicle standards.

The area of non-compliance may compromise the safety of vehicle occupants or other road users.

For example:

  • brake friction material is worn below the Transport Agency’s specifications, but the backing plate is not yet exposed
  • brake drum ovality or diameter, or brake disc runout or thickness, is just outside the vehicle or brake manufacturer’s service limits
  • a brake fluid sample shows signs of dirt or contamination
  • a brake that is required to comply with an approved brake standard has brake friction material that cannot be demonstrated to have been manufactured by a recognised vehicle or brake friction material manufacturer, or supplied by a recognised supplier.

You do not thoroughly inspect all components or correctly determine whether the service brakes and park brakes comply with all legal requirements, including approved vehicle standards.

The area of non-compliance is unlikely to compromise the safety of vehicle occupants or other road users.

For example:

  • You do not take a brake fluid sample, flexible brake lines are not inspected under pressure.

You thoroughly inspect all components in accordance with Transport Agency instructions and correctly determine whether the service brakes and park brakes comply with all legal requirements, including approved vehicle standards.

8.1.2
Technical competence

You demonstrate:

  • little or no competence in the technical aspects relating to service brakes and park brakes, including their compliance with approved vehicle standards, or
  • a level of competence that is likely to compromise the safety of vehicle occupants or other road users.

This means there are significant gaps in your knowledge of, or skills in:

  • the assessment of service brakes and park brakes
  • the legal requirements (including Transport Agency requirements) relating to service brakes and park brakes
  • Transport Agency guidelines relating to service brakes and park brakes
  • the operation of the equipment you use for assessing service brakes and park brakes.

You demonstrate:

  • some competence in the technical aspects relating to service brakes and park brakes, including their compliance with approved vehicle standards, or
  • a level of competence that may compromise the safety of vehicle occupants or other road users.

This means there are some gaps in your knowledge of, or skills in:

  • the assessment of service brakes and park brakes
  • the legal requirements (including Transport Agency requirements) relating to service brakes and park brakes
  • Transport Agency guidelines relating to service brakes and park brakes
  • the operation of the equipment you use for assessing service brakes and park brakes.

You demonstrate:

  • adequate competence in the technical aspects relating to service brakes and park brakes, including their compliance with approved vehicle standards, or
  • a level of competence that is unlikely to compromise the safety of vehicle occupants or other road users.

This means there are minor gaps in your knowledge of, or skills in:

  • the assessment of service brakes and park brakes
  • the legal requirements (including Transport Agency requirements) relating to service brakes and park brakes
  • Transport Agency guidelines relating to service brakes and park brakes
  • the operation of the equipment you use for assessing service brakes and park brakes.

You can demonstrate comprehensive competence in the technical aspects relating to service brakes and park brakes, including their compliance with approved vehicle standards.

This means you can demonstrate comprehensive knowledge of, or skills in:

  • the assessment of service brakes and park brakes
  • the legal requirements (including Transport Agency requirements) relating to service brakes and park brakes
  • Transport Agency guidelines relating to service brakes and park brakes
  • the operation of the equipment you use for assessing service brakes and park brakes.
8.1.3
Technical equipment

Not all of the specified equipment is available. Where equipment is available, some or all of it is not in working order.

All specified equipment is available and in working order, but some or all of it is in poor condition.

All specified equipment is available, in working order and in at least adequate condition.

All specified equipment is available and in good condition and working order.

9 Steering and suspension

9-1 Steering and suspension systems

Requirements

  What the Transport Agency expects of you How the Transport Agency will assess your performance
9.1.1
Correct technical decisions

You thoroughly inspect all steering and suspension systems and correctly determine whether they comply with all Transport Agency requirements, taking into account technical information provided by the Transport Agency such as the VIRM: Entry certification.

The Transport Agency will:

  • talk to you
  • observe you at work
  • inspect vehicles which you have certified
  • inspect inspection and certification documents you use and complete
  • inspect information you enter into the Transport Agency computer system.

The Transport Agency may:

  • take into account outcomes from complaints and random re-inspections since your last review.
9.1.2
Technical competence

You are competent in all technical aspects relating to steering and suspension systems.

This means you are competent in:

  • the assessment of steering and suspension systems
  • Transport Agency requirements (including VIRM requirements) relating to steering and suspension systems and the assessment of steering and suspension systems
  • Transport Agency guidelines relating to steering and suspension systems
  • the operation of the equipment you use for assessing steering and suspension systems.

The Transport Agency will:

  • talk to you
  • ask questions to check your competence relating to steering and suspension systems and the assessment of steering and suspension systems
  • observe you at work
  • inspect inspection and certification documents you use and complete
  • inspect your Training record.

The Transport Agency may administer a short test on steering and suspension systems.

9.1.3
Technical equipment

You have:

  • jacks or other suitable equipment to lift steered wheels off the ground
  • a leverage bar
  • a hand-held inspection lamp.

The equipment is in good condition and working order.

The Transport Agency will inspect your technical equipment.

Scores

  Score
0
1
2
3
9.1.1
Correct technical decisions

You do not thoroughly inspect all steering and suspension systems and correctly determine whether they comply with all Transport Agency requirements, including approved vehicle standards.

The area of non-compliance is likely to compromise the safety of vehicle occupants or other road users.

For example:

  • a component or mechanism is excessively worn, loose, damaged or missing, seriously compromising the ability to safely drive and steer the vehicle.

You do not thoroughly inspect all steering and suspension systems and correctly determine whether they comply with all Transport Agency requirements, including approved vehicle standards.

The area of non-compliance may compromise the safety of vehicle occupants or other road users.

For example:

  • a component or mechanism is worn, loose, damaged or missing, but the ability to drive and steer the vehicle, although potentially compromised, is not yet affected
  • a vehicle that is required to comply with an approved steering system standard did not comply, or cannot be demonstrated to have complied, with an approved standard at the time the vehicle was manufactured.

You do not thoroughly inspect all steering and suspension systems and correctly determine whether they comply with all Transport Agency requirements, including approved vehicle standards

The area of non-compliance is unlikely to compromise the safety of vehicle occupants or other road users.

For example:

  • a component or mechanism does not meet legal requirements, but the ability to drive and steer the vehicle is unlikely to be affected
  • a left-hand drive vehicle does not comply with the requirements of the left-hand drive exemption.

You thoroughly inspect all steering and suspension systems and correctly determine whether they comply with all Transport Agency requirements, including approved vehicle standards.

9.1.2
Technical competence

You demonstrate:

  • little or no competence in the technical aspects relating to steering and suspension systems, or
  • a level of competence that is likely to compromise the safety of vehicle occupants or other road users.

This means there are significant gaps in your knowledge of, or skills in:

  • the assessment of steering and suspension systems, and approved vehicle standards
  • Transport Agency requirements (including VIRM requirements) relating to steering and suspension systems
  • Transport Agency guidelines relating to steering and suspension systems
  • the operation of the equipment you use for assessing steering and suspension systems.

You demonstrate:

  • some competence in the technical aspects relating to steering and suspension systems, or
  • a level of competence that may compromise the safety of vehicle occupants or other road users.

This means there are some gaps in your knowledge of, or skills in:

  • the assessment of steering and suspension systems
  • Transport Agency requirements (including VIRM requirements) relating to steering and suspension systems and approved vehicle standards
  • Transport Agency guidelines relating to steering and suspension systems
  • the operation of the equipment you use for assessing steering and suspension systems.

You demonstrate:

  • adequate competence in the technical aspects relating to steering and suspension systems, or
  • a level of competence that is unlikely to compromise the safety of vehicle occupants or other road users.

This means there are minor gaps in your knowledge of, or skills in:

  • the assessment of steering and suspension systems and approved vehicle standards
  • Transport Agency requirements (including VIRM requirements) relating to steering and suspension systems
  • Transport Agency guidelines relating to steering and suspension systems
  • the operation of the equipment you use for assessing steering and suspension systems.

You can demonstrate comprehensive competence in the technical aspects relating to steering and suspension systems.

This means you can demonstrate comprehensive knowledge of, and skills in:

  • the assessment of steering and suspension systems and approved vehicle standards
  • Transport Agency requirements (including VIRM requirements) relating to steering and suspension systems
  • Transport Agency guidelines relating to steering and suspension systems
  • the operation of the equipment you use for assessing steering and suspension systems.
9.1.3
Technical equipment

Not all of the specified equipment is available. Where equipment is available, some or all of it is not in working order.

All specified equipment is available and in working order, but some or all of it is in poor condition.

All specified equipment is available, in working order and in at least adequate condition.

All specified equipment is available and in good condition and working order.

10 Tyres, wheels and hubs

10-1 Tyres, wheels, hubs, axles and mudguards

Requirements

  What the Transport Agency expects of you How the Transport Agency will assess your performance
10.1.1
Correct technical decisions

You thoroughly inspect all tyres, wheels, hubs, axles and mudguards and correctly determine whether they comply with all Transport Agency requirements, taking into account technical information provided by the Transport Agency such as the VIRM: Entry certification.

The Transport Agency will:

  • talk to you
  • observe you at work
  • inspect vehicles which you have certified
  • inspect inspection and certification documents you use and complete
  • inspect information you enter into the Transport Agency computer system.

The Transport Agency may:

  • take into account outcomes from complaints, and random re-inspections since your last review.
10.1.2
Technical competence

You are competent in all technical aspects relating to tyres, wheels, hubs, axles and mudguards.

This means you are competent in:

  • the assessment of tyres, wheels, hubs, axles and mudguards
  • Transport Agency requirements (including VIRM requirements) relating to tyres, wheels, hubs, axles and mudguards and their assessment
  • Transport Agency guidelines relating to tyres, wheels, hubs, axles and mudguards, and
  • the operation of the equipment you use for assessing tyres, wheels, hubs, axles and mudguards.

The Transport Agency will:

  • talk to you
  • ask questions to check your competence relating to tyres, wheels, hubs, axles and mudguards and the assessment of tyres, wheels, hubs, axles and mudguards
  • observe you at work
  • inspect inspection and certification documents you use and complete
  • inspect your Training record.

The Transport Agency may administer a short test on tyres, wheels, hubs, axles and mudguards.

10.1.3
Technical equipment

You have:

  • a tyre tread depth gauge
  • jacks or other suitable equipment to lift wheels off the ground.

The equipment is in good condition and working order.

The Transport Agency will inspect your technical equipment.

Scores

  Score
0
1
2
3
10.1.1
Correct technical decisions

You do not thoroughly inspect all tyres, wheels, hubs, axles and mudguards and correctly determine whether they comply with all Transport Agency requirements, including approved vehicle standards.

The area of non-compliance is likely to compromise the safety of vehicle occupants or other road users.

For example:

  • a tyre or wheel is badly damaged
  • a tyre has no tread
  • a hub is not securely attached to the vehicle
  • the tyres on the same axle are of different sizes.

You do not thoroughly inspect all tyres, wheels, hubs, axles and mudguards and correctly determine whether they comply with all Transport Agency requirements including approved vehicle standards.

The area of non-compliance may compromise the safety of vehicle occupants or other road users.

For example:

  • one incorrect tyre is fitted (eg a space-saver tyre)
  • there is damage to a tyre or wheel that could compromise the safe operation of the vehicle
  • two or more tyres have non-complying tread depth (but are not bald)
  • a new tyre that is required to comply with an approved tyre standard did not comply, or cannot be demonstrated to have complied, with an approved standard at the time the tyre was manufactured
  • a retreaded tyre that is required to comply with an approved retread tyre standard did not comply, or cannot be demonstrated to have complied, with an approved standard at the time the tyre was retreaded.

You do not thoroughly inspect all tyres, wheels, hubs, axles and mudguards and correctly determine whether they comply with all Transport Agency requirements including approved vehicle standards.

The area of non-compliance is unlikely to compromise the safety of vehicle occupants or other road users.

For example:

  • one tyre has non-complying tread depth (but is not bald)
  • the tyres on the front axle, although matched, are not of the same constructuion as the tyres on the rear axle
  • a temporary-use (space-saver) tyre that is required to comply with an approved temporary-use tyre standard did not comply, or cannot be demonstrated to have complied, with an approved standard at the time the tyre was manufactured
  • the tyre load ratings are more than two load indexes different.

You thoroughly inspect all tyres, wheels, hubs, axles and mudguards and correctly determine whether they comply with all Transport Agency requirements, including approved vehicle standards.

10.1.2
Technical competence

You demonstrate:

  • little or no competence in the technical aspects relating to tyres, wheels, hubs, axles and mudguards, including their compliance with approved vehicle standards, or
  • a level of competence that is likely to compromise the safety of vehicle occupants or other road users.

This means there are significant gaps in your knowledge of, or skills in:

  • the assessment of tyres, wheels, hubs, axles and mudguards
  • Transport Agency requirements (including VIRM requirements) relating to tyres, wheels, hubs, axles and mudguards and their assessment
  • Transport Agency guidelines relating to tyres, wheels, hubs, axles and mudguards
  • the operation of the equipment you use for assessing tyres, wheels, hubs, axles and mudguards.

You demonstrate:

  • some competence in the technical aspects relating to tyres, wheels, hubs, axles and mudguards, including their compliance with approved vehicle standards, or
  • a level of competence that may compromise the safety of vehicle occupants or other road users.

This means there are some gaps in your knowledge of, or skills in:

  • the assessment of tyres, wheels, hubs, axles and mudguards
  • Transport Agency requirements (including VIRM requirements) relating to tyres, wheels, hubs, axles and mudguards and their assessment
  • Transport Agency guidelines relating to tyres, wheels, hubs, axles and mudguards
  • the operation of the equipment you use for assessing tyres, wheels, hubs, axles and mudguards.

You demonstrate:

  • adequate competence in the technical aspects relating to tyres, wheels, hubs, axles and mudguards, including their compliance with approved vehicle standards, or
  • a level of competence that is unlikely to compromise the safety of vehicle occupants or other road users.

This means there are minor gaps in your knowledge of, or skills in:

  • the assessment of tyres, wheels, hubs, axles and mudguards
  • Transport Agency requirements (including VIRM requirements) relating to tyres, wheels, hubs, axles and mudguards
  • Transport Agency guidelines relating to tyres, wheels, hubs, axles and mudguards
  • the operation of the equipment you use for assessing tyres, wheels, hubs, axles and mudguards.

You can demonstrate comprehensive competence in the technical aspects relating to tyres, wheels, hubs, axles and mudguards, including their compliance with approved vehicle standards.

This means you can demonstrate comprehensive knowledge of, and skills in:

  • the assessment of tyres, wheels, hubs, axles and mudguards
  • Transport Agency requirements (including VIRM requirements) relating to tyres, wheels, hubs, axles and mudguards
  • Transport Agency guidelines relating to tyres, wheels, hubs, axles and mudguards
  • the operation of the equipment you use for assessing tyres, wheels, hubs, axles and mudguards.
10.1.3
Technical equipment

Not all of the specified equipment is available. Where equipment is available, some or all of it is not in working order.

All specified equipment is available and in working order, but some or all of it is in poor condition.

All specified equipment is available, in working order and in at least adequate condition.

All specified equipment is available and in good condition and working order.

11 Exhaust system

11-1 Exhaust system and visible smoke

Requirements

  What the Transport Agency expects of you How the Transport Agency will assess your performance
11.1.1
Correct technical decisions

You thoroughly inspect all components and correctly determine whether they comply with all Transport Agency requirements for exhaust systems and visible smoke, taking into account technical information provided by the Transport Agency such as the VIRM: Entry certification.

The Transport Agency will:

  • talk to you
  • observe you at work
  • inspect vehicles which you have certified
  • inspect inspection and certification documents you use and complete
  • inspect information you enter into the Transport Agency computer system.

The Transport Agency may:

  • take into account outcomes from complaints, and random re-inspections since your last review.
11.1.2
Technical competence

You are competent in all technical aspects relating to exhaust systems and visible smoke.

This means you are competent in:

  • the assessment of exhaust systems and visible smoke
  • Transport Agency requirements (including VIRM requirements) relating to exhaust systems and visible smoke and the assessment of exhaust systems and visible smoke
  • Transport Agency guidelines relating to exhaust systems and visible smoke
  • the operation of the equipment you use for assessing exhaust systems and visible smoke.

The Transport Agency will:

  • talk to you
  • ask questions to check your competence relating to exhaust systems and visible smoke and the assessment of exhaust systems and visible smoke
  • observe you at work
  • inspect inspection and certification documents you use and complete
  • inspect your Training record.

The Transport Agency may administer a short test on exhaust systems and visible smoke.

11.1.3
Technical equipment

You have:

  • a hand-held inspection lamp.

The lamp is in good condition and working order.

The Transport Agency will inspect your technical equipment.

Scores

  Score
0
1
2
3
11.1.1
Correct technical decisions

You do not thoroughly inspect all components and correctly determine whether they comply with all Transport Agency requirements for exhaust systems and visible smoke.

The area of non-compliance is likely to compromise the safety of vehicle occupants or other road users.

For example:

  • the exhaust system and silencer, or part of the exhaust system and silencer, is seriously damaged or has deteriorated or is liable to fall off when the vehicle is in operation
  • a vehicle emission system required to comply with an approved emission standard did not comply, or cannot be demonstrated to have complied, with an approved standard at the time the vehicle was manufactured.

You do not thoroughly inspect all components and correctly determine whether they comply with all Transport Agency requirements for exhaust systems and visible smoke.

The area of non-compliance may compromise the safety of vehicle occupants or other road users.

For example:

  • the exhaust system and silencer, or a part of the exhaust system and silencer, is not properly mounted but there is no immediate danger of the system or part falling off
  • the vehicle emits excessive visible smoke
  • the vehicle does not meet the required metered emission test specifications.

You do not thoroughly inspect all components and correctly determine whether they comply with all Transport Agency requirements for exhaust systems and visible smoke.

The area of non-compliance is unlikely to compromise the safety of vehicle occupants or other road users.

For example:

  • the noise output is higher than when the vehicle was fitted with its original exhaust system, and the exhaust noise is either well above the noise limit or has not passed an objective noise test
  • the vehicle emits some visible smoke
  • the vehicle has not undergone a metered emission test.

You thoroughly inspect all components and correctly determine whether they comply with all Transport Agency requirements for exhaust systems and visible smoke, including approved vehicle standards.

11.1.2
Technical competence

You demonstrate:

  • little or no competence in the technical aspects relating to exhaust systems, emission standards and visible smoke, or
  • a level of competence that is likely to compromise the safety of vehicle occupants or other road users.

This means there are significant gaps in your knowledge of, or skills in:

  • the assessment of exhaust systems, emission standards, and visible smoke
  • Transport Agency requirements (including VIRM requirements) relating to exhaust systems, emission standards and visible smoke and the assessment of exhaust systems, emission standards and visible smoke
  • Transport Agency guidelines relating to exhaust systems and visible smoke
  • the operation of the equipment you use for assessing exhaust systems, emission standards and visible smoke.

You demonstrate:

  • some competence in the technical aspects relating to exhaust systems,emission standards and visible smoke, or
  • a level of competence that may compromise the safety of vehicle occupants or other road users.

This means there are some gaps in your knowledge of, or skills in:

  • the assessment of exhaust systems, emission standards and visible smoke
  • Transport Agency requirements (including VIRM requirements) relating to exhaust systems, emission standards and visible smoke and the assessment of exhaust systems and visible smoke
  • Transport Agency guidelines relating to exhaust systems, emission standards and visible smoke
  • the operation of the equipment you use for assessing exhaust systems, emission standards and visible smoke.

You demonstrate:

  • adequate competence in the technical aspects relating to exhaust systems, emission standards and visible smoke, or
  • a level of competence that is unlikely to compromise the safety of vehicle occupants or other road users.

This means there are minor gaps in your knowledge of, or skills in:

  • the assessment of exhaust systems, emission standards and visible smoke
  • Transport Agency requirements (including VIRM requirements) relating to exhaust systems, emission standards and visible smoke and the assessment of exhaust systems, emission standards and visible smoke
  • Transport Agency guidelines relating to exhaust systems, emission standards and visible smoke
  • the operation of the equipment you use for assessing exhaust systems, emission standards and visible smoke.

You can demonstrate comprehensive competence in the technical aspects relating to exhaust systems, emission standards and visible smoke.

This means you can demonstrate comprehensive knowledge of, and skills in:

  • the assessment of exhaust systems, emission standards and visible smoke
  • Transport Agency requirements (including VIRM requirements) relating to exhaust systems, emission standards and visible smoke and the assessment of exhaust systems, emission standards and visible smoke
  • Transport Agency guidelines relating to exhaust systems, emission standards and visible smoke
  • the operation of the equipment you use for assessing exhaust systems, emission standards and visible smoke.
11.1.3
Technical equipment

Not all of the specified equipment is available. Where equipment is available, some or all of it is not in working order.

All specified equipment is available and in working order, but some or all of it is in poor condition.

All specified equipment is available, in working order and in at least adequate condition.

All specified equipment is available and in good condition and working order.

Measuring your performance


As part of the Performance Review System (PRS), you are expected to regularly assess your own performance (also known as self-assessment). You can do this using the electronic scoresheet available in the Master records section.

This section explains how to carry out a self-assessment and how you can measure your performance and calculate your total PRS score. Transport Agency Transport Officers will use the same measures when they review you to see how well you meet the Transport Agency’s expectations, as set out in this manual.

Purpose of self-assessments

When you carry out a self-assessment, your main purpose is to assess your performance against the descriptions in the General part and the Technical part of the PRS. This will enable you to identify and address any issues and improve the performance of your inspection work. It will also help you to achieve the highest score possible at your next review – and the higher your score, the less frequent the reviews.

When carrying out a self assessment, if you identify any areas where you need improvement (ie you score yourself less than 3), write it down on an Improvement record form along with what you will do to improve.

Overview of the self-assessment process

Before you do your first self-assessment, you should read these guidelines so you know how to score your performance. To help you understand the self-assessment process, the brief outline below shows you what is involved.

1. Print the scoring sheet PDF. It contains both the General Part and Technical Part scoring sheets. Alternatively, download you may use the electronic scoring sheets.

2. Read the descriptions for each element in the Technical and General parts of the PRS and identify the ones that best match your performance. We recommend you work from right (score 3) to left (score 0).

3. Enter the corresponding element scores into the Technical and General part scoring sheets as you go, and write any comments and items for improvement into the comments fields.

4. Calculate the average element scores for the Technical part (one each for Correct technical decisions, Technical competence and Technical equipment) and transfer these to the General part scoring sheet.

5. If you wish, you can calculate the category scores and the total and adjusted total scores. These will give you some idea of how well you perform overall.

6. Transfer any issues identified during your self-assessment onto an Improvement record form. Make sure you address these issues as soon as possible and record your actions on this form.

7. If you wish, you may like to recalculate the total and adjusted scores, taking into account the improvements you have made, so you can see how much you have improved your performance.

What are the scores and what do they mean?

The PRS calculates four types of scores:

  • element scores
  • category scores
  • total score
  • adjusted score.

The performance review system is based on four major score values:

0 – performance is unacceptable

1 – performance is marginal and requires substantial improvement

2 – performance is adequate but there is room for improvement

3 – performance is consistently good and meets the required standard.

In the PRS, you will find four descriptions (one for each score) for each element covered in the PRS. Assess your performance against these descriptions, and score yourself according to the one that most closely represents your performance.

If a description does not fully describe your performance, you can vary the score with:

  • a plus (+) to indicate that your performance is slightly better than the description, or
  • a minus (–) to show that your performance is close, but does not quite match the description.

This table sets out all the possible element scores and their numerical values. The numerical values are used to calculate your total score.

Using the scoring process described in the following pages, you will arrive at a total score for your performance.

Element score Numerical value    

0

0+

1-

1

1+

2-

2

2+

3-

3

0.0

0.3

0.7

1.0

1.3

1.7

2.0

2.3

2.7

3.0

 

 

 

 

Scoring process
-------->

 

 

 

 

 

Total score
eg 2.3

 

How do I score myself?

The following guidelines explain how the total adjusted score is calculated and will allow you to understand the process. When you carry out your self-assessment, you may perform the calculations as shown or you may use the electronic scoresheets which are available on the Transport Agency website. These are easy to use and will automatically perform the calculations for you.

The performance review system (PRS) is divided into two parts. Your total score is determined by the General part. Scores from the Technical part feed into the General part.

For each part, you have a corresponding PRS Self-assessment record.

You can start with either the General part or the Technical part when carrying out your self-assessments.

If you start with the Technical part, proceed as follows:

Self-assessment – Technical part

  • Decide how you want to carry out the technical assessment. For example, you may choose to observe a certifier carrying out an inspection, or carry out an inspection yourself, or arrange for another inspector to observe your inspection (peer review) or re-inspect a vehicle or component after a certifier has completed an inspection.
  • Choose what vehicle components you want to assess. Your PRS technical Self-assessment record has space for seven items because this is the number of items for which the Transport Agency reviewer will check your performance in the course of a regular review. The Transport Agency recommends that you do self-assessments on all items over a period of time.
  • Based on the descriptions in the Technical part of the PRS manual, score your or your staff’s performance for each element. Use the description that best fits your performance. Enter your scores in your PRS technical Self-assessment record.
  • When you have completed the PRS technical Self-assessment record, calculate the average scores for each of these three elements:

– Correct technical decisions

– Technical competence

– Technical equipment.

Do this by:

  • finding the equivalent numerical value for each score (use the element score/numerical values table as outlined on the following page)
  • adding together all the numerical values for each element, then
  • dividing the total by the number of scores you have assessed.

Alternatively, fill out the electronic scoresheets which are available on the Transport Agency website.

For example, for ‘Correct technical decision’ you may have scored the following vehicle components and assigned the corresponding numerical values:

Item Your scores for correct technical decisions Your numerical values for correct technical decisions

1. Brakes

2

2.0

2. Steering

2+

2.3

3. Tyres, wheels and hubs

3-

2.7

4. Vehicle structure

2

2.0

5. Headlamps

2

2.0

6. Windscreen wash and wipe

2-

1.7

7. Mirrors

2

2

Total 14.7

Divide the total by the number of scores (7 in this case) to get your average Correct technical decision score:

14.7 ÷ 7 = 2.1

Follow the same process for Technical competence and Technical equipment.

Note that for some items no technical equipment is used, so no Technical equipment score can be allocated. In such cases, you would divide the total by the number of items you have assessed which can have a score.

When you come to fill in the PRS administration Self-assessment record, transfer these average scores into the appropriate sections:

Correct technical decisions: into section 1.2 of PRS administration Self-assessment record

Technical competence: into section 2.1 of PRS administration Self-assessment record

Technical equipment: into section 3.2 of PRS administration Self-assessment record

Self-assessment – General part

Based on the descriptions provided in the General part of the PRS, score your or your staff’s performance for each element using the description that best fits your performance. Enter your scores in your PRS general Self-assessment record.

  • When you have completed the PRS general Self-assessment record, calculate the average score for each of the five categories of the administration part: certification outcomes, competence, resources, management and performance improvements.

Do this by:

  • finding the equivalent numerical value for each score (use the element score/numerical values table as outlined on page 2)
  • adding together all the numerical values for each element, then
  • dividing the total by the number of scores in that category.

For example, in the certification outcomes category, add together the numerical values of your scores for the four elements in that category:

  • Correct certification outcomes
  • Correct technical decisions (from Technical part)
  • Correct use of certification documents
  • Correct entry of certification information

Then add up the four numerical values for this category and divide this figure by four to get the average.

How do I calculate my total score?

Work out your total score using the average scores of the five categories of the administration part. When you calculate the total score, each of the averages is ‘weighted’ to reflect its relative importance.

Use the table below to work out your total score. In the left column, fill in the average numerical values from your scores in the five categories of the administration part.

Then calculate the weighted scores by multiplying the averages by the corresponding weights. The total of the weighted scores is your total score.

Note that the total weighted value is not necessarily your total adjusted score as a further adjustment may be applied to take account of any serious areas of weakness.

Category

Average numerical value of category

Weight

Weighted value
of category

Technical performance

x 0.50 =

Administrative performance

x 0.20 =

Resources

x 0.10 =

Management

x 0.10 =

Performance improvement

x 0.10 =

Total weighted value (add all weighted numerical values)  

For example:

Category

Average numerical value of category

Weight

Weighted value
of category

Technical performance

2.4

x 0.50 =

1.2

Administrative performance

2.0

x 0.20 =

0.4

Resources

2.5

x 0.10 =

0.25

Management

2.0

x 0.10 =

0.2

Performance improvement

1.7

x 0.10 =

0.17

Total weighted value (add all weighted numerical values)

2.22

Your total score is the total weighted value rounded to the nearest decimal place. In the example, your total score, based on a total weighted value of 2.22, is 2.2 – a good score.

The electronic scoresheet

All scores may be entered in an electronic scoresheet which is available in the Master records. This will calculate your total score automatically. It will also calculate an adjusted score which may be different from the total score.

How do I calculate my adjusted score?

Your total score can be adjusted downwards to reflect any major gaps in your knowledge or skills.

This is because the total score will be capped if there are any significant weaknesses in important areas. These are shown by scores of 1+ or less in any of the technical scores. The count of such scores can progressively limit the level of the total score you can achieve. Your total score adjusted by these limiters is your adjusted score.

The lowest score in the unweighted category scores may also affect the adjusted score.

These two factors, which may limit the total score to give an adjusted score, work as follows:

a) scores of 1+ or less scored for Technical decisions and Technical competence in the Technical part, and scores of 1+ or less in any of the administration part category scores (with the exception of Management). The higher the count of these scores, the lower the adjusted score will be. The following table illustrates their effect.

Count of scores equal to or below 1+

Maximum possible adjusted score

1

2.4

2 2.3
3 2.1
4 2.0
5 1.9
6 1.7
7 1.4
8 1.3
9 1.2
10 1.1
11 1.0

b) the lowest score in any category may downgrade the adjusted total further according to the following table.

Count of scores equal to or below 1+

Maximum possible adjusted score

1.0

1.5

1.1 1.6
1.2 1.7
1.3 1.8
1.4 1.9
1.5 2.0
1.6 2.1
1.7 2.2
1.8 2.3
1.9 2.4
2–2.69 2.9
2.7–3 No further adjustment made at this stage

The final consideration

The total adjusted scores will be used to determine how often you need to be reviewed. Consistently good total adjusted scores will mean fewer reviews (and lower costs) while consistently poor total adjusted scores will lead to more frequent reviews (and higher costs). Persistent low total adjusted scores will lead to some form of sanction.

Refer to the Scores and actions table  for further details.

Scores and actions table

Total adjusted score
(Note 1)

All category scores must be equal or higher than
(Note 2)

Action/Result

Interval until next regular review

Comments

0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

Suspension for up to six months

Full review required after the suspension period.

The total score from the full review after the suspension period must improve to at least 1.5, with no category scoring less than 1.00.

First regular review following reinstatement will be after 6 months

1.0

1.1

1.2

1.3

1.4

Follow-up review (full review)
may be required within 2 months.

The total score from the follow-up review (full review) must improve to at least 1.5 with no category scoring less than 1.00. Otherwise, a suspension up to 6 months may apply.

1.5

1.6

1.7

1.8

1.9

2.0

1.00

1.10

1.20

1.30

1.40

1.50

Follow-up
may be required within 4 weeks for any element scored 1+ or less (Note 3).

6 months

7 months

8 months

9 months

10 months

12 months

If elements scoring 1+ or less do not improve to 2– or higher after the follow-up, the total score will be reduced by 0.2 points for each element not improved.

If, after the total score reduction, the total score is still 1.5 or lower, any element still scoring 1+ or less may require a second follow-up within 2 months.

If there are still elements scoring 1+ or less after the second follow-up, a full review may be required within 2 months.

A score of 2.0 or less indicates that performance may not be adequate. A letter will be sent expressing the Transport Agency’s expectation that performance improve to at least 2.6 by the next review.

2.1

2.2

2.3

2.4

1.60

1.70

1.80

1.90

13 months

15 months

16 months

17 months

2.5

2.6

2.7

2.8

2.9

2.00

18 months

19 months

20 months

22 months

23 months

In order to achieve a total score of 2.5 or higher, each element score, except for management category elements, must be 2– or higher.

If any element score (except for management category elements) is below 2–, the actual total score cannot exceed 2.4.

3.0

2.70

24 months

In order to achieve a total score of 3.0, consistency must be demonstrated by a total score of 2.5 or higher in the last regular review. Otherwise the total score becomes 2.9.

Note 1

The total score may be adjusted downwards if some category scores are below 1+.

Note 2

If there are category scores that are lower than the minima specified for a particular total score, the actual total score becomes the score that matches the lowest category score.

Note 3

‘Follow-up’ here means a progress check on remedial action taken by a certifier in respect of one or more elements where serious problems have been identified, either by way of:

  • a reviewer visit focussing on the elements
  • if possible, a certifier providing documentary evidence to a reviewer, eg by mailing or faxing a Training record.

Master records

The documents below are editable PDFs which use features available in Adobe Reader 8 or later,
or equivalent (Adobe Reader).

PRS electronic scoring sheet (version 3.1, June 2009)

Spreadsheet ( 94KB)

PRS scoring sheet (manually complete) PDF logo (2 pages | 56KB)
PRS training record PDF logo (1 page | 94KB)
PRS complaints record PDF logo (1 page | 47KB)
PRS technical information record PDF logo (1 page | 111KB)
PRS staff record PDF logo (1 page | 114KB)
PRS induction record PDF logo (1 page | 129KB)
PRS improvement record PDF logo (1 page | 45KB)
PRS equipment record PDF logo (1 page | 141KB)
PRS delegation record PDF logo (1 page | 160KB)
PRS controlled documents record PDF logo (1 page | 105KB)
Notification of lost or stolen controlled documents PDF logo (1 page | 52KB)
Notification of vehicle inspector transfer PDF logo (1 page | 50KB)