Print Download PDF

VIRM: In-service certification amendment – effective 1 November 2017

List of changes

To view the page, click on the link in the section column.

To view the changes in one document download the List of changes and preview pages.

Section

Change description

Introduction

1-5 Inspection premises and equipment

  • For clarity, IT system requirements added: To connect to our computer systems, you must operate Windows 7, 8.1 or 10 and run a web browser of Internet Explorer 11 (IE11) to connect. These are the only operating systems that are supported by the Transport Agency to ensure security to our systems.
General vehicles

2-1 External projections

  • Rear bumper removed from frontal impact requirements.
3-1 Structure
  • Rear bumper removed from frontal impact requirements.
5-1 Glazing
  • A V above the e2 mark means toughened, VLT <70%.
  • Sample of a V above the e2 mark added to Figure 5-1-1.
9-1 Steering and suspension systems
  • Clarifies that a left hand drive vehicle cannot be operated in a transport service, rental service or otherwise for commercial purposes for hire or reward (with some exceptions).
11-1 Exhaust system
  • Clarification around exhaust outlet positioning when the exhaust pipe does not extend beyond the rear of the vehicle.
12-1 Light vehicle towbar and fifth wheel
  • Note added regarding safety chains for towbars with a removable ball mount.
Heavy vehicles
2-1 External projections
  • Rear bumper removed from frontal impact requirements.
3-1 Structure
  • (incorporation of Technical note 1)
    Note 6: Some new trucks imported from Japan fitted with ShinMaywa tipper bodies in Japan can be accepted without an LT400. See Technical Bulletin 8 for a list of the makes and models that can be accepted without an LT400.
11-1 Exhaust system
  • Clarification around exhaust outlet positioning when the exhaust pipe does not extend beyond the rear of the vehicle.
Light passenger service vehicles
2-1 External projections
  • Rear bumper removed from frontal impact requirements.
5-1 Glazing
  • A V above the e2 mark means toughened, VLT <70%.
  • Sample of a V above the e2 mark added to Figure 5-1-1.
6-3 PSV entry and exit steps, ramps and hoists
  • Clarifies in note at top of page which requirements apply to PSVs that comply with UN/ECE standards.
  • On a vehicle fitted with a wheelchair ramp or hoist that entered passenger service in New Zealand on or after 1 July 2000, or on a PSV fitted with a wheelchair ramp or hoist on or after 1 July 2000, a wheelchair ramp or hoist must display a load rating of at least 300kg.
12-1 Light vehicle towbar and fifth wheel
  • Note added regarding safety chains requirements for towbars with a removable ball mount.

14-6 PSV baggage and freight restraints

(Note: this is a late addition)

  • Clarification that a stretch cargo net of reasonable quality would be sufficient to meet the requirement of safely securing items of cargo likely to be carried in a small passenger services vehicle.
Heavy passenger service vehicles
2-1 External projections
  • Rear bumper removed from frontal impact requirements.
6-3 PSV entry and exit steps, ramps and hoists
  • Clarifies in note at top of page which requirements apply to PSVs that comply with UN/ECE standards.
  • On a vehicle fitted with a wheelchair ramp or hoist that entered passenger service in New Zealand on or after 1 July 2000, or on a PSV fitted with a wheelchair ramp or hoist on or after 1 July 2000, a wheelchair ramp or hoist must display a load rating of at least 300kg.
Technical bulletins (general)
13 Acceptable overseas proof of modification
  • Updated to include the new acceptable modifications from Australia and the United States.
Technical bulletins (CoF)
4 Taximeter compliance
7 Stock crate certification
  • Clarifications about when to certify.
8 ShinMaywa tipper bodies fitted to new trucks imported from Japan

Sign up for news

Join our mailing list

Stationery ordering process

Find out about ordering labels and forms