1 December 2016 (WoF only)
VIRM: In-service certification update –
effective 1 December 2016
List of changes
To view the page, click on the link in the section column.
To view the changes in one document, download the List of changes and screenshot preview package.
LVV changes
The acceptance of European Whole of Vehicle Type Approval for modification on light vehicles impact across too many sections to list here. However, the change can be seen with the usual yellow highlight and text similar to the following:
(Reject the vehicle if...) “the vehicle has not been certified to an accepted overseas system as described in Technical bulletin 13”
Section | Change description |
|---|
Introduction |
1-5 Inspection premises and equipment | - 5.3 Inspection site requirements, underbody examinations row: ‘other equipment enabling adequate inspection of the underbody of the vehicle’ added.
|
6 Appointments | - 6.1.4 Requirements to retain appointment – exceptions to the 25 inspections per year requirement added
|
General vehicles |
3-1 Structure | - Added to Table 3-1-1, Campervan conversion row, LVV certification not required if there’s a secondary certification plate or label.
|
4-2 Front and rear fog lamps | - Note 5 amended: A forward-facing permitted lamp that does not comply with the equipment, condition and performance requirements must be made to comply, be removed from the vehicle , or be disabled so that it does not emit a light.
|
4-3 Cornering lamps | - Note 4 amended: A forward-facing permitted lamp that does not comply with the equipment, condition and performance requirements must be made to comply, be removed from the vehicle , or be disabled so that it does not emit a light.
|
4-4 Daytime running lamps | - Note 3 amended: A forward-facing permitted lamp that does not comply with the equipment, condition and performance requirements must be made to comply, be removed from the vehicle , or be disabled so that it does not emit a light .
|
4-8 Side marker lamps | - Added to RfR 2 and Sol 2:’ unless the vehicle is a production vehicle and the lamp is fitted as original equipment by the vehicle manufacturer’
|
4-11 High mounted stop lamps | - Rfr 1, Sol 1: “in New Zealand” deleted; “or manufactured” added
|
7-6 Frontal impact airbags | - Rfr 4b: clarifies that deterioration does not include deterioration of the dash surface due to the effects of sunlight
|
13-5 Electric and hybrid vehicle electrical system | - New section for hybrid and electric vehicles
|
| Motorcycles |
| 4-2 Front and rear fog lamps | - Note 5 amended: A forward-facing permitted lamp that does not comply with the equipment, condition and performance requirements must be made to comply, be removed from the vehicle, or be disabled so that it does not emit a light.
|
| 4-3 Cornering lamps | - Note 4 amended: A forward-facing permitted lamp that does not comply with the equipment, condition and performance requirements must be made to comply, be removed from the vehicle, or be disabled so that it does not emit a light.
|
| 4-4 Daytime running lamps | - Note 3 amended: A forward-facing permitted lamp that does not comply with the equipment, condition and performance requirements must be made to comply, be removed from the vehicle, or be disabled so that it does not emit a light.
|
Technical bulletins (general) |
13 Accepted overseas proof of modification | - List of accepted overseas modifications and how to recognise them
|
Forklifts |
4-2 Front and rear fog lamps | - Note 5 added: A forward-facing permitted lamp that does not comply with the equipment, condition and performance requirements must be made to comply, be removed from the vehicle, or be disabled so that it does not emit a light.
|
Unclassified vehicles |
4-2 Front and rear fog lamps | - Note 5 added: A forward-facing permitted lamp that does not comply with the equipment, condition and performance requirements must be made to comply, be removed from the vehicle, or be disabled so that it does not emit a light.
|
