Home
VIRMs
Light vehicle repair certification
Introduction
Inspection and certification process
Record of certification (section 6.6 of the Rule)
3 Inspection and certification process
3-7 Record of certification (section 6.6 of the Rule)
1. The repair certifier must complete an LT307 or LT308 for any vehicle inspected (as applicable) .
2. The repair certifier must retain the top copy of the LT307 or LT308 (as applicable) .
3. The repair certifier must provide one copy of the LT307 or LT308 (usually the carbon copy) to the owner of the vehicle (as applicable) .
4. The repair certifier must hold all documentary evidence as required by the technical pages of this manual.
Light vehicle repair certification
- Introduction
- 1 Purpose and Scope
- 2 Overview of the manual
- 3 Inspection and certification process
- 3-1 Duties and responsibilities
- 3-2 Disqualification from certification
- 3-3 Establishing whether a vehicle must be repair certified
- 3-4 Identifying the vehicle class
- 3-5 Repair instructions
- 3-6 Establishing whether the vehicle complies
- 3-7 Record of certification (section 6.6 of the Rule)
- 3-8 Collecting fees
- 3-9 Vehicle quarantine
- 3-10 Evidence of repair and inspection process
- 3-11 Repairer register
- 3-12 Repair shop profile
- 4 Complaints
- 5 Inspection premises and equipment
- 6 Appointments
- 7 Sample certification documents
- 8 Definitions and abbreviations
- 1 Vehicle identification
- 2 Vehicle structure
- 3 Vision
- 4 Entrance and exit
- 5 Vehicle interior
- 6 Brakes
- 7 Steering and suspension
- 8 Vehicle measurement
- 9 General repairs
- 10 Motorcycles
- Technical bulletins
