Reasons for rejection Permitted equipment 1. A motorcycle is fitted with more than: a) two front fog lamps, or b) two rear fog lamps. 2. A retrofitted pair of fog lamps is not: a) fitted symmetrically, or b) fitted as far towards each side of the motorcycle as is practicable, or c) positioned higher than the dipped-beam headlamps. Condition (Note 1) 3. A lamp is insecure or contains moisture in the form of large droplets, runs or puddles . 4. A lens is missing, or has a hole
Reasons for rejection Permitted equipment 1. A forklift is fitted with: a) only one front fog lamp, or b) more than one pair of front fog lamps. 2. A forklift is fitted with more than two rear fog lamps. 3. A retrofitted pair of fog lamps is: a) not fitted symmetrically, or b) not fitted as far towards each side of the vehicle as is practicable, or c) positioned higher than the dipped-beam headlamps. Condition 4. A lamp is insecure or contains moisture in the form of large
Reasons for rejection Mandatory equipment 1. Where an interior fitting, control or surface has been added, removed, substituted or has deteriorated, the likelihood of injury to occupants has not been minimised. Modification 2. A modification (Note 1) affects an interior fitting, control or surface, and: a) is not excluded from the requirements for LVV specialist certification (Table 7-7-1), and b) is missing proof of LVV specialist or accepted overseas certification, ie: i. the vehicle is
Reasons for rejection Mandatory equipment 1. Where an interior fitting, control or surface has been added, removed, substituted or has deteriorated, the likelihood of injury to occupants has not been minimised. Modification 2. A modification (Note 1) affects an interior fitting, control or surface, and: a) is not excluded from the requirements for LVV specialist certification (Table 7-7-1), and b) is missing proof of LVV specialist or accepted overseas certification, ie: i. the vehicle is
Reference General vehicles, 11-1 Exhaust system Motorcycles, 11-1 Exhaust system What is the purpose of the Noise Quick Check? The purpose of this test procedure is to enable vehicle inspectors to carry out an exhaust noise check with an acceptable noise meter to ensure that vehicle exhaust systems that have been modified to be noisier than OE remain well below the maximum noise levels specified in law (ie be below the noise limits specified in the VIRM). Any vehicle that fails the
-beam headlamps. Condition 5. A lamp is insecure or contains moisture in the form of large droplets, runs or puddles. 6. A lens is missing or has a hole, crack or other damage that allows moisture or dirt to enter. 7. A reflector is damaged or has deteriorated so that light output is reduced. 8. A fog lamp warning device, if fitted, is obscured from the driver’s vision. Performance 9. When switched on, a front fog lamp does not operate. 10. When switched on, a front fog lamp emits light
(see Note 3) 5. A lamp is insecure or contains moisture in the form of large droplets, runs or puddles . 6. A lens is missing, or has a hole, crack or other damage that allows moisture or dirt to enter. 7. A reflector is damaged or has deteriorated so that light output is reduced. 8. A fog lamp warning device, if fitted, is obscured from the driver’s vision. Performance 9. When switched on, a front fog lamp does not operate (Note 5). 10. When switched on, a front fog lamp emits light
(see Note 3) 5. A lamp is insecure or contains moisture in the form of large droplets, runs or puddles . 6. A lens is missing, or has a hole, crack or other damage that allows moisture or dirt to enter. 7. A reflector is damaged or has deteriorated so that light output is reduced. 8. A fog lamp warning device, if fitted, is obscured from the driver’s vision. Performance 9. When switched on, a front fog lamp does not operate (Note 5). 10. When switched on, a front fog lamp emits light
(see Note 3) 5. A lamp is insecure or contains moisture in the form of large droplets, runs or puddles . 6. A lens is missing, or has a hole, crack or other damage that allows moisture or dirt to enter. 7. A reflector is damaged or has deteriorated so that light output is reduced. 8. A fog lamp warning device, if fitted, is obscured from the driver’s vision. Performance 9. When switched on, a front fog lamp does not operate (Note 5). 10. When switched on, a front fog lamp emits light
(see Note 3) 5. A lamp is insecure or contains moisture in the form of large droplets, runs or puddles . 6. A lens is missing, or has a hole, crack or other damage that allows moisture or dirt to enter. 7. A reflector is damaged or has deteriorated so that light output is reduced. 8. A fog lamp warning device, if fitted, is obscured from the driver’s vision. Performance 9. When switched on, a front fog lamp does not operate (Note 5). 10. When switched on, a front fog lamp emits light
