Lighting
4-7 Rearward-facing position lamps
Reasons for rejection
Mandatory equipment
1. A vehicle does not comply with a requirement relating to mandatory equipment set out in:
Compliance with approved standards
2. A rearward-facing position lamp that is required to comply with an approved rearward-facing position lamp standard does not comply, or cannot be demonstrated to comply, with at least one of the standards listed in Table 4-7-1.
Condition and performance
3. A rearward-facing position lamp does not comply with a requirement relating to condition or performance set out in:
Table 4-7-1. Approved rearward-facing position lamp standards*
|
UN-ECE Regulation no. |
EEC/EC Directive |
FMVSS |
ADR |
Japan |
|---|---|---|---|---|
|
7 |
76/758 |
108 |
49 |
TS for front and rear position lamps |
* A rearward-facing position lamp that is required to comply with an approved rearward-facing position lamp standard must comply with at least one of the standards listed in the table.
See also Figure 4-7-1.
Figure 4-7-1. Approved rearward-facing position lamp standard markings
The following standard markings may assist in determining compliance with approved standards.
Summary of legislation
Applicable legislation
Mandatory equipment
1. Vehicles must comply with the requirements relating to mandatory equipment set out in:
Compliance with approved standards
2. The rearward-facing position lamps fitted to the following vehicles must comply with one or more of the approved rearward-facing position lamp standards in Table 4-7-1:
a) vehicles of class MA and NA manufactured on or after 1 January 1992
b) vehicles of class MB, MC, MD1, MD2, MD3, MD4, ME, NB, NC, TC and TD manufactured on or after 1 January 1996
c) vehicles of class TA, TB and group L manufactured on or after 1 January 2006.
Condition and performance
3. Rearward-facing position lamps must comply with the requirements relating to condition and performance set out in: