4-3 Cornering lamps
Reasons for rejection
1. A vehicle is fitted with:
a) only one lamp, or
b) more than one pair of lamps, or
c) a lamp that either:
i. was not originally fitted by the vehicle manufacturer, or
ii. is not fitted in the original position.
2. A lamp is insecure.
3. A lens is missing, or has a hole, crack or other damage that allows moisture or dirt to enter.
4. A lamp’s reflector is damaged or has deteriorated so that light output is reduced.
5. When activated by switching on the direction indicator lamp or by turning the steering wheel, a cornering lamp:
a) does not operate, or
b) does not project in the direction of the turn.
6. A cornering lamp emits light that is:
a) not substantially white or amber, or
b) not approximately equal in colour or intensity from the other lamp in the pair, or
c) not steady, or
d) not bright enough to illuminate the road ahead in the direction of the turn, eg due to modification, deterioration, dirt or or an incorrect light source, or
e) too bright causing dazzle to other road users, eg due to an incorrect light source or misalignment, or
f) altered, eg due to damage or modification.
7. Where a cornering lamp comprises an array of light sources (eg LEDs), fewer than 75% of these operate.
Cornering lamp means a lamp designed to emit light at the front of a vehicle to supplement the vehicle’s headlamps by illuminating the road ahead in the direction of the turn.
An original equipment (OE) lamp is one that is fitted by the vehicle manufacturer in the original position, or is an equivalent replacement or aftermarket lamp suitable for the position provided by the vehicle manufacturer for that lamp. All other lamps are considered retrofitted (ie non-OE).
A vehicle originally manufactured with a cornering lamp arrangement that differs from what is required or permitted in this section may retain the original cornering lamps provided they remain fitted in their original position and perform as intended by the vehicle manufacturer.
A forward-facing permitted lamp that does not comply with the equipment, condition and performance requirements must be disabled so that it does not emit a light.
Summary of legislation
1. One pair of cornering lamps fitted as OE.
2. A cornering lamp must be in sound condition.
3. A cornering lamp must operate in a way that is appropriate for the lamp and the vehicle.
4. A cornering lamp must emit light that is substantially white or amber.
5. A pair of cornering lamps must emit light that is approximately equal in colour and intensity.
6. A cornering lamp must emit a steady light.
7. A cornering lamp must provide sufficient light output to illuminate the road ahead in the direction of the turn.
8. A cornering lamp must be correctly aligned.
9. Where a cornering lamp comprises an array of light sources (eg LEDs), at least 75% of these must operate.
10. A cornering lamp that is affected by a modification:
a) must meet equipment, condition and performance requirements, and
b) does not require LVV specialist certification.
Page amended 1 December 2016 (see amendment details).
- General vehicles
- Heavy vehicles
- Light PSVs
- 1 Vehicle identification
- 2 Vehicle exterior
- 3 Vehicle structure
- 4 Lighting
- 4-1 Headlamps
- 4-2 Front and rear fog lamps
- 4-3 Cornering lamps
- 4-4 Daytime running lamps
- 4-5 Direction indicator lamps
- 4-6 Forward-facing position lamps
- 4-7 Rearward-facing position lamps
- 4-8 Side-marker lamps
- 4-9 End-outline marker lamps
- 4-10 Stop lamps
- 4-11 High-mounted stop lamps
- 4-12 Rear-reg.-plate illumination lamps
- 4-13 Rear-reflectors
- 4-14 Reversing lamps
- 4-15 Other lighting
- 4-17 PSV interior lighting
- 5 Vision
- 6 Entrance and exit
- 7 Vehicle interior
- 8 Brakes
- 9 Steering and suspension
- 10 Tyres, wheels and hubs
- 11 Exhaust
- 12 Towing connections
- 13 Miscellaneous items
- 14 Load restraints
- 15 Certificate of loading
- 16 Transport service licence
- Heavy PSVs
- General trailers
- Heavy trailers
- Unclassified vehicles
- Technical bulletins (general)
- Technical bulletins (CoF)
- Interim amendments