) destroyed, or g) obliterated, or h) affixed unlawfully or by unauthorised persons (Note 3). Note 1 The vehicle inspector must notify NZTA using the vehicle report form if there is reason to believe that the VIN or chassis number has been tampered with in any way. The vehicle inspector must not issue a WoF/CoF/permit until approved by NZTA. Approval will usually include the issue or re-issue of a new VIN plate. The vehicle inspector must not issue a WoF/CoF/permit if there is reason to
tread-wear indicator) means the projections within the principal grooves designed to give a visual indication of the degree of wear of the tread. To help locate these on a tyre, inspectors should look for a ‘ ’ or ‘TWI’ mark on the outer edge of the tyre side wall (most tyres have these marks). Tube means an inflatable elastic liner, in the form of a hollow ring fitted with an inflation valve assembly, designed for insertion into certain tyre assemblies to provide a cushion of air or gas, that
Reasons for rejection Condition 1. An engine, gearbox, transfer case, differential or other driveline mounting is insecure. 2. A chain sprocket: a) is loose, or b) has excessively worn teeth. 3. A drive chain: a) is excessively loose, or b) has excessively worn links. 4. A driveshaft is bent or severely damaged. 5. A driveshaft flange: a) is insecure, or b) has a bolt or nut missing. 6. A rubber doughnut-type driveshaft coupling: a) is worn or damaged beyond manufacturer’s
Reasons for rejection Permitted equipment 1. A motorcycle is fitted with more than: a) two front fog lamps, or b) two rear fog lamps. 2. A retrofitted pair of fog lamps is not: a) fitted symmetrically, or b) fitted as far towards each side of the motorcycle as is practicable, or c) positioned higher than the dipped-beam headlamps. Condition (Note 1) 3. A lamp is insecure or contains moisture in the form of large droplets, runs or puddles . 4. A lens is missing, or has a hole
repair f) make of vehicle g) registration number of vehicle, or if registration number is unavailable, then the vehicle identification number (VIN) or chassis number h) details of work carried out i) type and location of repaired damage on the windscreen (it is recommended that this be marked on a schematic windscreen on the invoice form)j) in the case of repairs performed to this standard, a statement that the repairs have been made in accordance and comply with AS/NZS 2366.1 using a
vehicle identity card. 4. A device that allows the headlamps to flash alternately is fitted to a motorcycle that is not an emergency vehicle or a pilot vehicle. 5. A motorcycle is fitted with a dipped-beam headlamp that projects the maximum intensity of the beam to the right. Condition (Note 4) 6. A lamp is insecure, obscured, or contains moisture in the form of large droplets, runs or puddles . 7. A lens is missing, or has a hole, crack or other damage that allows moisture or dirt to
